Raise the thumbscrew lid (
) and tighten the
thumbscrew as illustrated (
). Then push the lid back.
Orient and align the stand arm with the monitor (
), push them together until they click and lock into place (
).
Gently attempt to pull them back apart to check that they have properly engaged.
Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
To move the monitor, you must hold the handle and the bottom of the stand base at the same time as illustrated. You can protect the monitor using the supplied protective cover.
You might want to adjust the monitor stand height. See Adjusting the monitor height on page 19 for more information.
XL2720
1
2 
1
2
How to assemble your monitor hardware | 11 |