BenQ RL2450H / RL2450HT user manual Connect the PC video cable, ~ +15

Page 9

Gently attempt to pull them back apart to check that they have properly engaged.

Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

You should position the monitor and angle the screen to minimize unwanted reflections from other light sources.

2. Connect the PC video cable

Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems.

To Connect the D-Sub Cable

Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from accidently falling out during use.

-5	O	~ +15	O

Either

How to assemble your monitor hardware (RL2450H)

Image 9

Contents Page Care And Cleaning Power SafetyCopyright DisclaimerBenQ ecoFACTS Table of Contents Quick Start Guide Getting startedCD-ROM Getting to know your monitor Control buttons Power buttonFront view Back viewAttach the monitor base How to assemble your monitor hardware RL2450H~ +15 Connect the PC video cableConnect the power cable to the monitor Connect the headphonesConnect-to and turn-on the power How to detach the stand base Prepare the monitor and areaRemove the monitor stand Precautions Using the monitor wall mounting kitHow to attach the monitor base +15 How to detach the base Adjusting the monitor height Pivot the display Rotating the monitorFully extend the monitor and tilt it Rotate the monitor 90 degrees clockwise as illustratedAdjust the monitor to the desired viewing angle Viewing angle adjustmentUsing the monitor wall mounting kit Getting the most from your BenQ monitor How to install the monitor on a new computer Click Finish Restart the computerRL2450H RL2450H /RL2450HT How to upgrade the monitor on an existing computer How to install on Windows 7 system Select Properties from the menu Click the Hardware tabClick Close Click the Monitor tab and the Properties button How to install on Windows Vista systemsControl panel How to adjust your monitorBasic menu operation To change the default settings, see Customizing By default, the key is the hot key for Display ModeFor Down/Decrease adjustment By default, the key is the hot key for Smart ScalingSetting up your own game mode Picture optimizationCustomizing the hot keys Using Smart Scaling Adjusting display modeAdjust the value You can resize your display by Smart ScalingNavigating the main menu Adjusts the horizontal position of the screen image Adjusts the vertical position of the screen imageDisplay menu Phase Adjusts the degree of difference between darkness Lightness Adjusts the balance between light and dark shadesPicture menu Brings out the dark shades by increasing the brightnessWith natural coloring. This is the factory default Color Adjusts the tone luminance. The default value is 3Adjusts the degree of how we perceive colors Adjusts the purity degree of colorsPicture Advanced menu Mode from Picture Mode. The screen will be divided into two Applies customized display settingsThis feature is provided to allow aspect ratios other than Displays the input image in its native resolutionDetected video signal Adjusts the display size to best suit your needsThis feature provides a highlight area to focus on certain Content, e.g. a YouTube video or an online gameFunction Range Save Settings menuAdjusts the audio volume Audio menuMutes the audio input System menu Use this to change the input to that appropriate to yourVideo cable connection type 日本語 Power saving mode Sets the time to power off the monitor automaticallyWhen this function is activated, Hdmi port will be Displays the current monitor property settingsFrequently asked questions FAQ TroubleshootingNeed more help?