BenQ G920WL, G920WAL Press Menu to leave the OSD Settings menu, Off, Software on the PC, Yes

Page 29

OSD Lock

Prevents all the monitor settings from being accidentally changed. When this function is activated, the OSD controls and hotkey operations will be disabled.

Press the W or X keys to change the settings.

To unlock the OSD controls when the OSD is preset to be locked, press and hold the "MENU" key for 15 seconds to enter the "OSD Lock" option and make changes. Alternatively, you may use the W or X keys to select "NO" in the "OSD Lock" submenu from the "OSD Settings" menu, and all OSD controls will be accessible.

•YES

•NO

Press MENU to leave the OSD Settings menu.

DDC/CI*	Allows the monitor	Press the ENTER key to	• ON
	settings to be set through	select this option. Press the	• OFF
	the software on the PC.	W or X keys to change the
		settings.

Information	Displays the current	Press the ENTER key to
	monitor property settings.	select this option.

Reset All	Resets all mode, color and	Press the W or X keys to	• YES
	geometry settings to the	change the settings.	• NO
	factory default values.

*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for remote diagnostics.

How to adjust your monitor 29

Image 29

Contents Welcome Copyright Care And CleaningDisclaimer ServicingTable of Contents CD-ROM Getting startedGetting started Front view Back view Getting to know your monitorAttach the monitor base How to assemble your monitor hardwareEither Connect the power cable to the monitorConnect the PC video cable Route the cables via the cable clip Connect-to and turn-on the powerPrepare the monitor and area How to detach the stand baseGetting the most from your BenQ monitor How to install the monitor on a new computer See How to upgrade the monitor on an existing computerOpen Display Properties How to install on Windows 7 system selected models onlyClick the Hardware tab Click Generic PnP Monitor, and then the Properties buttonOpen Display Settings How to install on Windows Vista systemsClick the Advanced Settings button Click the Monitor tab and the Properties buttonClick the Settings tab and the Advanced button How to install on Windows XP systemClick the Driver tab and the Update Driver button Click the Properties buttonPicture optimization Control panel How to adjust your monitorMode hot key Hot key modeBrightness and Contrast hot keys Input hot key not available for analog-only modelsDisplay Picture Picture Advanced System Main menu modeTo return to the previous menu, press the Menu key Display menuInput signal Adjust the value See also Picture Picture menu Red Picture ModeGreen Game, or PhotoPicture Advanced menu Picture ModeWill be divided into two When Selected mode fromGame, or Windows the left windowInput System menuOSD Settings Press Enter to enter the OSD Settings menu OFF Press Menu to leave the OSD Settings menuSoftware on the PC YESFrequently asked questions FAQ TroubleshootingIs the prompt on the display illuminated in orange? Need more help?