Moxa Technologies 6250, 6450, 6150 manual CN2610 Series Appearance, Data Acquisition Redundancy

4

Secure Terminal Servers/Terminal Servers

Secure Terminal Server/Terminal Server

Data Acquisition Redundancy

The CN2610 uses 4 IP addresses in a DRDAS system. In the figure on	Primary PC, LAN B,
the previous page, RTU data is received through a serial port on the
	and 1st CN2610 dead
CN2610, and the data is transmitted to two PCs on two different LANs
using a total of four IP addresses. One of the four IP addresses is the
primary IP for transmitting data downstream to the RTU. The other
three IP addresses may not transmit data to the RTU as long as the
primary IP continues to be operational. This kind of architecture allows
the system to continue operation even if the Primary PC, LAN B, and
the Primary CN2610 crash at the same time.

CN2610 Series Appearance

LCM Display Panel

LED Indicators

Reset ButtonSystem Status, Serial Tx/Rx

Push Buttons

		Ethernet
		RJ45 10/100 Mbps			Serial Ports
			RS-232 Console Port
					8-pin RJ45, RS-232, 50 to 921.6 Kbps
	AC Power Input
	100 to 240 VAC Input, 47 to 63 Hz			Connection Cable
19-inch Rackmount
				8-pin RJ45 to DB9 Cable
The Rackmount Kit is a Standard Accessory

Ordering Information

CN2610-8:8-port RS-232 Dual LAN Async Server

CN2610-8-48V:8-port RS-232 Dual LAN Async Server

Package Checklist

•1 CN2610

•Quick Installation Guide

•Document and Software CD-ROM

•Power Cord x 1 (AC model only)

•CBL-RJ45F9-150 x 1

•CBL-RJ45M25-150 x 1

Optional Accessories

Power Cord: See page 12-10

Serial Cable & Serial Adapter: See page 12-4

4-28

www. moxa . com e - mail: info@moxa . com

IP Systèmes, importateur/distributeur des solutions de communication industrielle MOXA en France Tel : 0820 200 290 (15cts/min)