Manual recording, Start manual recording

RECORDING

Manual recording

ERASE

FINALIZE

SCROLL

DISPLAY

SOURCE

REC TYPE

RECORD

PLAY/PAUSE

STOP

CDR

10 11 12

MINI AUDIO

13 14 15 16

ANALOG

RECORDER

CANCEL

MENU/STORE

ON/OFF

REWIND

FFWD

OPEN/CLOSE

EASY JOG

Recordable

ENTER

3 With the recorder stopped, press REC TYPE three times to enter the Manual Record standby mode.

➜MANUAL starts to flash and the display shows REC MANUAL.

REM

REC TIME TRACK

TOTAL REM TRACK TIME FADE

STEP

DIGITAL I

PROGRAM

MANUAL SYNC

SCAN

OPTICAL I

CD RW

SHUFFLE REPEAT TRACK ALL

ANALOG

English

Important:

-Recording from CD-changers should always be started in the RECORD DISC, RECORD TRACK or MAKE CD mode.

-Only make analog recordings when digital recording is not possible.

Preparing for manual recording

1 Make sure the disc is absolutely free of scratches and dust particles.

2 Press SOURCE repeatedly until (depending on the connection used):

➜DIGITAL I d, OPTICAL I p or ANALOG a lights up and DIGITAL 1, OPTICAL or ANALOG appears on the display.

REM

REC TIME TRACK

TOTAL REM TRACK TIME FADE

STEP

DIGITAL I

PROGRAM

MANUAL SYNC

SCAN

OPTICAL I

CD RW

SHUFFLE REPEAT TRACK ALL

ANALOG

•When Auto Track is ON (default setting), track numbers will automatically be increased during recording.

•To switch off the Auto Track function you have to enter Menu mode.

If you wish to increase track numbers manually, press TRACK INCR(ement) on the remote control. For further instructions see Menu mode.

ON (AUTO): The track increments are automatically taken over from the digital source material or after 2.7 seconds silence during analog recording.

OFF (MANUAL): Track numbers can be incremented manually by pressing TRACK INCR(ement) on the remote control. (Minimum track length is 4 sec.) (This can also be done in Auto mode.)

• Track numbers cannot be changed after recording.

Note: Auto track works only with Consumer Sources with a digital output signal according to the IEC 958 (consumer part) audio standard.

•If CHECK INPUT message also flashes, the digital connection is incorrect.

4 Play the source first to set the optimal recording level on the CD recorder.

5 Rotate the EASY JOG/ENTER key until, on the Record/Play Level bar, all the blue segments are alight, but the red segments do not light continuously during the loudest passages.

➜Display shows _XX DB.

6 Stop the source.

Start manual recording

1 To start recording, press RECORD on the CD recorder and immediately start the source (from Stop-mode).

➜d lights continuously. The track number and recording time appear on the display.

•To record a 3-second silence at the start of a track, press PAUSE on the CD recorder before starting the source.

•To check the elapsed recording time, press DISPLAY on the CD recorder. (This can also be done during the recording.)

2 To stop recording, press STOP on the CD recorder.

➜ WAIT lights up and d goes out.

•If STOP was pressed within 3 seconds after RECORD, no recording will take place.

•To interrupt recording, press PAUSE on the CD recorder. d starts to flash. Resume at step 1.

After recording the display will show UPDATE for several seconds.

Note: With AUTO TRACK ON, the recorder will stop and go to REC STANDBY for 1 minute and then goes to stop mode automatically. Recordings from DAT, DCC or recordings made analogously will stop after 20 seconds silence. With AUTO TRACK OFF, the auto stop mode is disabled.

CDR570/00 specifications

The Philips CDR570/00 is an innovative compact disc recorder that redefines the way users approach the recording and playback of their favorite music and audio content. This device serves as an ideal solution for audiophiles and casual listeners alike, combining user-friendly features with state-of-the-art technology.

At the heart of the CDR570/00 is its ability to record directly onto CD-R and CD-RW discs, providing users the flexibility to create permanent audio recordings. This direct-to-disc recording capability eliminates the need for a computer, allowing for a straightforward and accessible way to compile song compilations, live recordings, and favorite playlists.

One of the standout features of the CDR570/00 is its integrated recording wizard, which guides users through the process of recording with ease. The system's intuitive interface simplifies the selection of tracks, fading options, and other customization settings, making it accessible for users with varying levels of technological proficiency.

The CDR570/00 also incorporates professional-grade audio technologies, ensuring high-quality recordings. With its analog and digital inputs, users can connect various audio sources, such as turntables, cassette players, and digital music players, creating a versatile recording setup. The built-in 24-bit digital-to-analog converter guarantees stunning audio clarity and fidelity, preserving the nuances of every recording.

In addition to recording, the Philips CDR570/00 doubles as a standard CD player, supporting CD, CD-R, and CD-RW formats. This feature allows users not only to play back their own custom recordings but also to enjoy a vast library of commercially available music.

Versatility and design are further enhanced by the CDR570/00's sleek aesthetics and compact form factor, making it a perfect fit for any audio setup, whether at home or in a small studio. Users can conveniently integrate the device with their existing audio equipment, enhancing their overall listening experience.

Overall, the Philips CDR570/00 combines practical usability, superior sound quality, and a stylish design, catering to both music enthusiasts and casual users. Whether preserving cherished audio memories or creating new music mixes, this compact disc recorder stands out as a remarkable addition to any audio collection. It showcases Philips' commitment to innovation in the realm of home audio solutions, offering a reliable and engaging way to enjoy music.