Philips CDR770, CDR771 manual Setup recommendations, Press ON/OFF CD recorder will switch on

Page 13

INSTALLATION

Power supply

 

Inserting batteries in the remote control

 

 

 

 

 

 

English

1 Plug the power cord supplied into the MAINS connector on the CD recorder, then into a mains socket.

2 Press ON/OFF.

The CD recorder will switch on.

Note:

-If the CD recorder is in Standby mode (red led on), press any key to activate the recorder.

-The CD recorder will automatically adjust to the local mains voltage.

-When the CD recorder is in the ‘OFF’ position, it is still consuming some power. If you wish to disconnect your player completely from the mains, withdraw the plug from the AC outlet.

Setup recommendations

-Place the CD recorder on a solid, vibration free surface.

-Do not place the CD recorder near a source of heat or in direct sunlight.

-Do not use the CD recorder under extremely damp conditions.

-If the CD recorder is placed in a cabinet, make sure that a 2.5 cm space remains free on all sides of the CD recorder for proper ventilation.

Important:

-Do not put the CD recorder on top of other equipement that heats up the CD recorder (e.g. receiver or amplifier).

1 Open the battery compartment cover.

2 Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as shown.

3 Replace the cover.

Note: We recommend you use 2 batteries of the same type and condition.

Batteries contain chemical substances, so they should be disposed of properly.

13

Image 13
Contents CDR770/771 Never Make or Change Connections with the Power Switched on Laser SafetyGeneral Information For Customer UseContents English Table of Contents About this manual Technical dataGeneral AudioAccessories Discs for recording Maintenance EnglishGeneral Information and Discs Discs for playbackControls on the front Controls and ConnectionsConnections at the back Display indications DisplayDisplay messages Menu messages See Menu mode Connections general InstallationAnalog connections Digital coaxial connections Digital optical connections Press ON/OFF CD recorder will switch on Setup recommendationsEnglish Remote control commands Remote ControlInserting discs CDRRemarks about recording RecordingRecording modes Your recorder offers several recording modesPreparing for autostart recording Autostart recordingStart autostart recording Preparing for manual recording Manual recordingTrack numbers cannot be changed after recording Manual starts to flash and the display shows REC ManualUnfinalizing Cdrw discs Finalizing CDR & Cdrw discsAuto finalizing Manual finalizingTo erase one or more tracks from the end Erasing Cdrw discsTo erase the entire disc Playing Selecting a track when CD play is stoppedPlaying a CD Selecting a trackSearch Hold down 5 or 6 in Play modeShuffle random order play Repeat CD, track or programRemarks about programming ProgrammingProgramming Clearing a programRemarks about Menu mode General operation of Menu English Menu ModeText input / text edit Menu MODE/CD TextErasing text / text erase Reviewing CD Text in memory / memory view Memory View CD NBalance only active in Record/Standby mode Menu MODE/RECORDING SettingsEnglish Auto track increment / auto track Fixing Problems English 3104 125
Related manuals
Manual 5 pages 8.43 Kb

CDR771, CDR770 specifications

The Philips CDR770 and CDR771 are notable models in the realm of audio recording technology, specifically designed for creating compact discs. Introduced in the late 1990s, these machines exemplify the evolution of digital recording and playback, catering to both audiophiles and casual users looking to preserve their music collections.

Both models utilize a robust, user-friendly interface that allows for straightforward operation. The CDR770 and CDR771 are equipped with built-in recording capabilities, enabling users to transfer vinyl, cassette tapes, or other audio sources directly onto CD. This versatility ensures that cherished music formats can be digitized with relative ease, breathing new life into older recordings.

One of the standout features of the Philips CDR770 and CDR771 is their advanced digital signal processing. This technology enhances the quality of recorded audio, allowing for cleaner sound with reduced noise and distortion. Users can enjoy an enriched listening experience, whether they are duplicating their favorite albums or creating custom compilations.

Furthermore, these models support various CD formats, including standard CD-R and CD-RW. Users have the flexibility to choose between one-time recording (CD-R) or re-recordable options (CD-RW), making the machines suitable for different needs. The inclusion of digital recording functions ensures that tracks can be edited, reordered, or finalized before burning, providing control over the final output.

Additionally, the Philips CDR770 and CDR771 incorporate features such as pitch control, which allows users to adjust playback speed without affecting the sound quality. This is particularly advantageous for musicians and audio enthusiasts who wish to experiment with tempo and sound.

Another characteristic that enhances usability is the inclusion of an LCD display which provides essential information about track information, remaining recording time, and playback status. The design is intuitive, making it easy for users to navigate through their musical projects without any steep learning curve.

In conclusion, both the Philips CDR770 and CDR771 are exemplary devices that combine functionality with advanced technology. Their ability to record, edit, and play back audio on CD format makes them invaluable tools for anyone looking to preserve music digitally or simply enjoy high-quality audio experiences. With solid build quality, intuitive interfaces, and impressive sound capabilities, these models continue to hold appeal for a niche market of passionate music lovers and recording enthusiasts alike.