THERMALINE T5000r SR Smart Ready Printer
Specifications
sl5000r upgrade kits
•SL5000r MP
915 MHz UHF encoder
•SL5000r C1
Class 1 protocol - Alien Technology Support for Class 1, 915 MHz UHF encoder
printing characteristics
•Print Speed:
T5204e SR: 10 IPS @ 203DPI (254mm/sec)
T5304e SR: 8 IPS @ 300DPI (203mm/sec)
•Printing Methods:Thermal Transfer or Direct Thermal
•Resolution: 203/300 DPI (operator interchangeable)
•Printable Width: 4.1” max
recommended label characteristics
•RFID Inlay Labels:
Alien ‘Squiggle’ Class 1 4” x 2”, 4” x 4”, 4” x 6”, 4” x 8”
Alien
rfid encoding modes
•Operation Modes:
Write/Verify/Print – writes RFID data to tag and verifies contents are written correctly, while also printing the desired image
•Error Handling Modes:
Overstrike – when a bad RFID tag is detected, overstrikes label and applies the data with the next label
Stop – when a bad tag is detected, stops the printer to allow for user invention
•Statistics Tracking:
Tracks number of tags written to and number of bad tags detected
rfid software migration tools
•Migration tools allow RFID tags to be automatically programmed with data from the following barcode symbologies:
GTIN carriers
Some restrictions may apply. Contact a Printronix Certified RFID Integrator for details.
media handling characteristics
•
•
•Continuous Labels: print continuously
•Peel Labels: peel from liner without assistance (peel mode requires rewind option)
media compatibility
•Media Types: Roll or fanfold
Die cut or continuous Labels, tags and tickets Paper, film or synthetic stock Thermal Transfer or Direct Thermal
•Media Width: 1.0” to 4.5” (T5204e SR/T5304e SR)
•Media Thickness 0.0025” to 0.010”
•Roll Core Diameter 3.0” (7.6 cm)
•Maximum Roll Diameter 8.0” (20.9 cm)
•Thermal Transfer Ribbon
Ribbon Width Range: 1.0” to 4.33” (T5204e SR/T5304e SR)
Ribbon Capacity: 625m
recommended ribbon characteristics
•Ribbon 625m length
•4.33” width
•Model 8500 premium wax formulation
•Model 8300 wax formulation
operator controls & indicators
•Operator Controls: Off
•Message Display: 32 character
•Indicators: Off
programming language
•Standard:
PGL – Printronix Graphics Language ZPL™ – Zebra Programming Language
barcode symbologies available
•Code 39, Code 128 (A, B, C) Codabar, Interleaved 2 of 5, FIM
sensing methods
•Transmissive, Reflective (Gap, Mark, Notch, Continuous Sensing Form)
interfaces
•Standard Serial RS232
IEEE 1284 (Centronics)
•Optional:
Ethernet (PrintNet)
Dual Ethernet/Wireless (802.11b)
fonts, graphics support, windows drivers
•Fonts: OCRA, OCRB, Courier, Letter Gothic, CG Triumvirate Bold Condensed
•Graphic Support: PCX and TIFF file formats
•Windows Drivers: Windows 95/98/2000/XP
memory
•DRAM: 8Mb standard (16Mb optional)
•Flash: 4Mb standard (10Mb optional)
power requirements
•Line Input:
•Power Consumption: 150 watts (typical)
•Regulatory Compliance:
environmental considerations
•Operating Temperature: 5°C to 40°C
•Dimensions: 11.7” W x 20.5” L x 13.0” H (T5204e SR/T5304e SR)
•Printer/Shipping Weight: 42lbs/51lbs (T5204e SR/T5304e SR)
*Specifications are subject to change without notification.
| Psion Teklogix™ is a trademark of Psion Teklogix Inc. Other product names mentioned in this |
|
| document may be trademarks of Psion Teklogix Inc. or trademarks or registered trademarks of other | www.psionteklogix.com |
hardware, software, or service providers and are used herein for identification purposes only. |