Tripp Lite U225-004-R owner manual Software Installation

3.Software Installation (continued)

3.1.3Windows® will search for the drivers; click "NEXT" to continue (see figure 3.1.3, page 19).

3.1.4Windows® will detect the suitable driver; click "NEXT" to continue (see figure 3.1.4, page 19).

3.1.5Click "Finish" (see figure 3.1.5, page 19).

3.1.6After installation is complete, check "My Computer"- "Control Panel"-" System"-"Device Manager" Hub on USB 2.0 Bus" under the Universal Serial Bus Controller (see figure 3.1.6, page 19).

3.2Windows® ME Driver Installation

After connecting the USB hub to your PC, the system will load the driver automatically.

While installation is complete, check "My Computer"-

"Control Panel"-" System"-"Device Manager" and you will see a "Generic USB Hub on USB 2.0 Bus" under the Universal Serial Bus Controller (see figure 3.2, page 20).

3.3Windows® 2000 Driver Installation

After connecting the USB hub to your PC, the system will load the driver automatically.

While installation is complete, check "My Computer"-

"Control Panel"-"System"-"Device Manager" and you will see a "Generic USB Hub" under the Universal Serial Bus Controller (see figure 3.3, page 20).

4