Other UPS Features, AC Receptacles | Tripp Lite INT 2200, INT 3000

Whenever your UPS is automatically correcting high or low AC line voltage, this green light will turn ON and the UPS will gently click. The more the UPS has to correct voltage, the more the green light will turn ON and the more the UPS will click. These are both normal, automatic operations of your UPS, and no action is required on your part.

This red light will turn ON if your UPS fails a self-test and/or the UPS battery is less than fully charged. Let the UPS charge for 12 hours and perform a second self-test. If the light continues to stay on, contact Tripp Lite for service.

This multi-colored light displays 4 separate UPS load conditions. It will turn from green (low) to yellow (medium) to red (high) as you connect equipment to show you the load level your UPS is supporting. When the light is red, your UPS is supporting a load above 85% of its capacity. If the red light begins flashing, then your UPS is severely overloaded. Remove overload immediately until light stops flashing.

Other UPS Features

AC Receptacles

The receptacles provide your connected equipment with AC line power during normal operation and battery power during black- outs and brownouts. They also protect your equipment against damaging surges and line noise. You can remotely reboot con- nected equipment by turning all of the receptacles OFF and ON at once using Tripp Lite UPS software. Select models, however, feature a unique “Remote Reboot Outlet” (identified on the back panel of your UPS) which allows you to use Tripp Lite UPS software to remotely reboot equipment connected to this outlet without interrupting power to equipment connected to the other outlets. See software instructions for details.

Note: constant power is available at the Remote Reboot Outlet (and all other outlets) unless controlled through Tripp Lite UPS software.

RS-232 Port

This port, labeled "LAN 4.1" on the UPS, connects your UPS to a workstation or server. Use with Tripp Lite software and cabling to monitor and manage network power and automatically save open files and shut down equipment during a blackout. This port uses RS-232 communications to transmit UPS and power conditions (Pin 7 = Transmit; Pin 8 = Common; Pin 9 = Receive). Contact Tripp Lite Customer Support for more information and a list of available SNMP, network management and connectivity products.

Contact Closure Ports

These ports, labeled "LAN 2.2" on the UPS, are also used to connect your UPS to a workstation or server. Use with Tripp Lite software and cabling to automatically save open files and shut down equipment during a blackout. This port uses contact- closure signals to indicate line-fail and low-battery status. Contact Tripp Lite Customer Support for more information.

INT 3000, INT 2200, XL INT 2200, XL INT 3000 specifications

Tripp Lite is renowned for producing reliable power protection solutions, and its line of Intelligent Rackmount UPS systems, including the XL INT 2200 and INT 3000, stands out in the market for their advanced features and robust performance. These models are designed to cater to the needs of various IT environments, ensuring the safety and sustainability of critical equipment.

The Tripp Lite XL INT 2200 offers a powerful 2200VA/1980W capacity, making it ideal for small to medium-sized servers, networking equipment, and other essential devices. One of its notable features is the line-interactive topology, which provides excellent voltage regulation without switching to battery power unless necessary. This results in enhanced efficiency and extended battery life. The XL INT 2200 also incorporates an automatic voltage regulation (AVR) feature, allowing it to correct minor fluctuations in utility power, which keeps connected devices safe and operational without depleting the battery.

On the other hand, the INT 3000 boasts a higher capacity of 3000VA/2700W, making it suitable for larger systems or multiple devices. Similar to its counterpart, the INT 3000 uses line-interactive technology but is optimized for heavier loads, ensuring that even the most demanding equipment remains powered during an outage. The model is equipped with enhanced communication options including USB, serial, and slots for optional SNMP/Web cards, allowing for easy integration into existing network management systems.

Both models are equipped with advanced LED status indicators that provide real-time information on the unit's battery status, load level, and operational conditions, simplifying monitoring and diagnostic processes. Additionally, they feature customizable alarm settings, ensuring that users are promptly alerted to any critical situations.

The build quality is robust, with a 2U rackmount form factor that allows for easy installation in standard server racks. Additionally, these UPS systems come with a built-in energy-saving mode, helping to reduce overall power consumption and operational costs.

In summary, the Tripp Lite XL INT 2200 and INT 3000 offer key features such as line-interactive topology, AVR technology, multiple communication options, and robust build quality. These characteristics make them an excellent choice for safeguarding valuable electronic equipment in data centers, network operations, and other critical applications where reliable power is essential. With Tripp Lite, users can trust that their systems are well-protected against power irregularities, ensuring uninterrupted performance and longevity.