Tripp Lite APSX750F specifications Specifications, System Overview, Output, Input

Page 2

10 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one half-cycle transfer time

750 watts continuous AC output in inverter mode

Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart)

OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage.)

3-stage, selectable 5/20 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging

Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank

Dual C13 output receptacles pass 120V line power or inverter output through to connected equipment

Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals

Moisture-resistant construction enables vehicular or marine operation in high humidity environments

3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings

Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status Set of 4 configuration dip switches support wet/gel battery charging profiles, charger enable/inhibit, and selectable 144/163/182/201V AC low voltage auto transfer during brownouts

Set of 4 additional configuration dip switches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings

Resettable 3A charger AC input breaker and resettable 4A AC output breaker and automatic 2-speed cooling fan protect the inverter from load and temperature-related failures

Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system

Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop

Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes user-configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged

Specifications

OVERVIEW

Intended Application

Emergency Home Power

 

 

SYSTEM OVERVIEW

 

Voltage compatibility

12VDC / 230VAC

 

 

Frequency

50 Hz

compatibility

 

 

 

OUTPUT

 

Output watts

INVERTER MODE - 750 watts continuous, Double Boost rated to 1500 watts peak (up to 10 seconds). Overpower

 

rating supports longer term overloads to 1125 watts for up to 15 seconds prior to inverter shutoff.

 

 

Output nominal

230V

voltage

 

 

 

Output voltage

LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC):

regulation

Maintains PWM sine wave output voltage of 230 VAC (+/-5%).

 

 

Output frequency

50 Hz (+/- 0.3 Hz)

regulation

 

 

 

Outlet quantity / type

2 AC outlets

 

 

Overload protection

Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads.

 

 

Continuous output

750

capacity (watts)

 

 

 

Peak output capacity

INVERTER MODE - Double Boost rated to 1500 watts peak (up to 10 seconds). Overpower rating supports longer term

(watts)

overloads to 1125 watts for up to 15 seconds prior to inverter shutoff.

 

 

INPUT

 

Input connection

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection.

type

 

 

 

Input cord length

DC INPUT: User supplies cabling. 6 gauge or larger (see manual). AC INPUT: IEC-320 C14 inlet, ships with 1.8 m (6 ft.)

 

IEC C13-C14 AC line cord.

 

 

Image 2
Contents Description FeaturesHighlights System Overview SpecificationsOverview OutputLine / Battery Transfer BatteryLeds Alarms & Switches Special FeaturesCertifications WarrantyRelated Items Certifications RoHS Compliant

APSX750F specifications

The Tripp Lite APSX750F is a versatile and robust power solution designed to meet the demands of various applications, ranging from small office setups to advanced technical environments. This power inverter features a unique combination of functionality and reliability, enabling users to maintain consistent power supply while on the go or in situations where traditional power sources are unavailable.

One of the main features of the APSX750F is its peak power output of 750 watts, offering enough power to drive multiple devices simultaneously. This capability makes it an ideal choice for powering laptops, monitors, and other essential electronics during outdoor trips or emergency situations. Its compact design allows for easy transport, making it an excellent companion for business travels, camping adventures, or any scenario requiring portable power.

The Tripp Lite APSX750F utilizes advanced pure sine wave technology, ensuring that the output is clean and stable. This technology is particularly important for sensitive electronics, allowing devices to operate without the risk of damage caused by voltage spikes or electrical noise. Such reliability is crucial for professionals who need to ensure that their equipment performs optimally without interference.

Another key characteristic of this inverter is its built-in fault protection features. The APSX750F includes safeguards against short circuits, overloads, and over-temperature conditions, providing users peace of mind when powering their devices. Additionally, the inverter features a convenient LED display that allows users to monitor input voltage, output load, and battery status, enhancing usability and ensuring that the system operates smoothly.

User-friendly operation is a highlight of the Tripp Lite APSX750F, as it can be easily connected to any 12V battery system to provide power. This seamless integration makes it suitable for use in various locations, whether in a vehicle, RV, or as a backup power source at home.

In summary, the Tripp Lite APSX750F is a powerful, reliable, and user-friendly power inverter, equipped with peak output capabilities, pure sine wave technology, and advanced safety features. With its versatility and efficiency, it's an indispensable tool for anyone in need of portable power solutions, especially in demanding environments or during emergencies.