Tripp Lite RMX 1000-2000 VA Indicator Lights Front Panel, Other UPS Features Rear Panel

Page 8

200208099 93-2040 SM1000RMX Owner’s Manual.qxd 9/12/2002 3:53 PM Page 8

Basic Operation continued

Indicator Lights (Front Panel)

POWER: Lights green when the UPS is receiving AC power. Illuminates constantly when the UPS is in the ON mode, indicating that batteries are charging and connected equipment is receiving filtered AC power. Flashes while in STANDBY mode to indicate that batteries are charging but connected equipment is not receiving power.

VOLTAGE CORRECTION: Lights green whenever your UPS is automatically correcting high or low AC line voltage. The UPS will also click. These are normal, automatic UPS operations, and no action is required on your part.

BATTERY CHARGE: This multicolored light displays 7 separate UPS battery charge conditions. It will turn from red (low) to yellow (medium) to green (full) to show you the level of battery charge. If the light is constant, your UPS is in the ON or STANDBY mode, operating from line power, and the battery is charging. If the light is flashing, your UPS is in the INVERT mode, operating from battery, and the battery is discharging. If the light is flashing red, your UPS is in INVERT and is nearly out of power: you should save files and shut down your equipment immediately.

OUTPUT LOAD: This multicolored light shows how heavy your UPS’s load is. Steady green indicates a light load, steady yellow a medium load. When the light is red, your UPS is supporting a load above 85% of its capacity. If the red light begins flashing, then your UPS is severely overloaded. Immediately remove load from the UPS until the light stops flashing.

BATTERY WARNING: Lights red if your UPS’s self-test (initiated with the Mute/Test Switch) reveals a low battery charge or internal fault. If this light turns on, let the UPS charge for 12 hours then perform a second self-test. If the light stays on, contact Tripp Lite for service.

Other UPS Features (Rear Panel)

15 amp NEMA 5-15R

AC Receptacles:Your UPS has 15-amp outlets that provide 120V AC power. These output receptacles supply your connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. The UPS protects equipment connected to these receptacles against damaging surges and line noise. If you have a DB9 or USB connection to your UPS, you can remotely reboot con- nected equipment by turning the UPS OFF and ON using Tripp Lite’s PowerAlert Software. See software instructions for details.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SmartPro RMX 1000-2000 VA Important Safety Instructions UPS Location WarningsSuggested Rackmount Installation for the SM1000RMX Suggested 4-Post Rackmount Installation for the SM2000RMXSuggested 2-Post Rackmount Installation for the SM2000RMX Turn your UPS on Plug your UPS’s line cord into an electrical outletPlug your equipment into your UPS Connection optional DB9 Port ConnectionUSB Port Connection EPO Port Connection Select Models OnlyButtons Front Panel Use the MUTE/TEST button to do two thingsIndicator Lights Front Panel Other UPS Features Rear PanelBasic Operation Storage Storage & ServiceService Page 93-2040

RMX 1000-2000 VA specifications

The Tripp Lite RMX 1000-2000 VA series is a versatile line of uninterruptible power supplies (UPS) designed to provide reliable power protection for a variety of electronic devices and systems. With a robust design tailored for small to medium-sized businesses, this UPS series ensures that critical equipment remains operational during power outages or fluctuations.

Key features of the RMX series include a compact, rackmountable design that allows for convenient installation in standard 19-inch racks or on desktop settings. The RMX 1000-2000 VA models offer a power capacity ranging from 1000 to 2000 VA, catering to diverse power needs of servers, telecommunications hardware, and other sensitive electronic devices. With its strong power output, the RMX series ensures a reliable power supply to all connected equipment, minimizing downtime and protecting against data loss.

The RMX series employs advanced technologies to provide efficient performance. Its line-interactive topology stabilizes voltage fluctuations through automatic voltage regulation (AVR). This feature boosts low voltages and trims high voltages without draining the battery, ensuring a steady power supply. Furthermore, the RMX UPS utilizes a microprocessor-controlled design, allowing for real-time monitoring and intelligent management of power resources.

Another significant characteristic of the RMX series is its extensive range of connectivity options. The models come equipped with multiple outlets, including both battery backup and surge-protected outlets, allowing users to connect various devices securely. Additionally, the RMX series supports RS-232 and USB communication ports for seamless integration with monitoring software that provides detailed diagnostics and alerts.

The RMX series is also built for longevity and ease of maintenance. It features user-replaceable batteries, allowing users to service their UPS without needing professional assistance. This capability not only extends the life of the unit but also minimizes lifecycle costs, making it an economical choice for businesses.

In summary, the Tripp Lite RMX 1000-2000 VA series UPS stands out for its combination of power capacity, technology, and user-friendly features. Whether used in server rooms or for telecommunications equipment, the RMX series ensures dependable power protection that can be relied upon during critical moments.
Top Page Image Contents