Tripp Lite SMART550USB Important Safety Instructions, UPS Location Warnings, Battery Warnings

Page 2

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation and storage of this product. Failure to heed these warnings will void the warranty.

UPS Location Warnings

Install the UPS indoors, away from excess moisture or heat, dust or direct sunlight.

For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C).

Leave adequate space around all sides of the UPS for proper ventilation.

UPS Connection Warnings

Connect the UPS directly to a properly grounded AC power outlet. Do not plug the UPS into itself; this will damage the UPS.

Do not modify the UPS plug, and do not use an adapter that would eliminate the ground connection.

Do not use extension cords to connect the UPS to an AC outlet. The warranty will be void if anything other than Tripp Lite surge suppressors are used to connect the UPS to an outlet.

If the UPS receives power from a motor-powered AC generator, the generator must provide clean, filtered, computer-grade output.

Equipment Connection Warnings

Do not use Tripp Lite UPS Systems for life-support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.

Do not connect surge suppressors or extension cords to the output of the UPS. This may damage the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

The UPS does not require routine maintenance. Do not open the UPS for any reason. There are no user-serviceable parts inside.

Batteries can present a risk of electrical shock and burns from high short-circuit current. Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries. Do not short or bridge the battery terminals with any object. Use tools with insulated handles. Battery replacement should be performed only by authorized service personnel using the same number and type of batteries (Sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for disposal requirements or in the USA only call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.

Do not attempt to add external batteries.

2

Image 2
Contents SmartPro UPS System UPS Location Warnings Important Safety InstructionsBattery Warnings UPS Connection WarningsSelect UPS Operating Mode Connect the UPS to An electrical outletUSB Communications Quick Installation optionalPhone Line/Network Line Surge Suppression ButtonsIndicator Lights Other UPS Features Service StorageManual de operación Advertencias sobre la conexión del UPS Importantes instrucciones de seguridadAdvertencias sobre la ubicación del UPS Advertencias sobre la conexión de equiposConecte el sistema UPS a una toma de corriente Selección del modo de operación del UPSComunicaciones USB Instalación rápida optativoSupresión de sobretensión en las líneas telefónica y de red BotonesOperación básica continuación Luces indicadorasOtras prestaciones del UPS Operación básica continuación Almacenamiento ServicioGuide de lutilisateur Mises en garde relatives au raccord du système UPS Mises en garde relatives à lemplacement du système UPSImportantes consignes de sécurité Mises en garde relatives au raccord de léquipementChoix du mode dexploitation du système UPS Branchez votre système UPS dans une prise de secteurSur les lignes téléphonique Et réseau Installation rapide facultativeSuppression de surtension Communications USBExploitation de base suite Voyants lumineuxAutres fonctions Exploitation de base suite Entreposage Entretien200607096
Related manuals
Manual 24 pages 38.49 Kb Manual 5 pages 55.47 Kb

SMART550USB specifications

The Tripp Lite SMART550USB is an essential uninterruptible power supply (UPS) that offers reliable battery backup and surge protection for sensitive electronic devices. With a power capacity of 550VA/300W, this UPS model is designed to keep equipment such as computers, networking devices, and home entertainment systems operational during power outages and fluctuations. The SMART550USB strikes a perfect balance between performance and affordability, making it an attractive choice for both home and small office environments.

One of the standout features of the SMART550USB is its sine wave output, which provides clean and stable power to connected devices. Unlike modified sine wave UPS systems, true sine wave output helps protect sensitive electronics from potential damage caused by electrical disturbances. This feature is particularly important for devices like desktop computers, printers, and audio/video equipment that require a steady, high-quality power supply to function properly.

The SMART550USB is also equipped with multiple outlets, allowing it to accommodate various devices simultaneously. The unit features a total of eight NEMA 5-15R outlets, with four outlets providing battery backup and surge protection, while the other four offer surge protection only. This configuration enables users to connect critical devices to the battery backup while protecting non-essential equipment from power surges.

Another notable characteristic of the SMART550USB is its user-friendly interface, which includes an LCD display that provides real-time information on battery status, load capacity, and estimated runtime. This allows users to monitor the UPS's performance at a glance, making it easy to manage power needs effectively.

For added convenience, the SMART550USB comes with USB and serial communication ports, enabling automatic shutdown and monitoring through compatible software. Users can connect the UPS to a computer to receive alerts regarding power conditions and manage settings through Tripp Lite's PowerAlert software.

The SMART550USB also features advanced technologies for battery management and protection. Its built-in automatic voltage regulation (AVR) helps maintain consistent voltage levels, reducing wear and extending battery life. Additionally, the unit includes an array of safety features, such as overload protection, short-circuit protection, and battery fault tolerance, ensuring that both the UPS and connected devices remain safe during operation.

In summary, the Tripp Lite SMART550USB is a versatile and dependable UPS solution, perfect for safeguarding critical electronic devices from power interruptions and surges. With its sine wave output, multiple outlets, user-friendly display, and advanced battery management, this UPS is an excellent choice for anyone looking to enhance power reliability in their home or office.