Tripp Lite SU1500RTXL2UA Input, Battery, Voltage Regulation, Leds Alarms & Switches, Physical

Page 3

Customized load

2 controllable load banks support load shedding and remote reboot on demand of locked network devices (bankone has 2

management

outlets, bank two has 4 outlets)

receptacles

 

 

 

Overload

20A input breaker

protection

 

 

 

INPUT

 

Maximum input

12A

amps

 

 

 

Input connection

NEMA 5-15P

type

 

 

 

Input cord length

10 ft./3m

 

 

Recommended

120V 15A

Electrical Service

 

 

 

BATTERY

 

Full load runtime

5 min. with internal batteries (1200W)

 

 

Half load runtime

14 min. with internal batteries (600W)

 

 

Expandable

Supports extended runtime with optional external battery pack BP48V24-2U (limit 1) and BP48V60RT-3U (multi-pack

battery runtime

compatible)

 

 

DC system voltage

48VDC

 

 

Typical battery

3-6 years, depending on usage

lifespan

 

 

 

Battery recharge

Less than 5 hours to 90%

rate

 

 

 

Replacement

RBC94-2U

Battery Cartridge

 

 

 

VOLTAGE REGULATION

Voltage regulation description

Overvoltage correction

Brownout correction

On-line, double-conversion power conditioning maintains output within 2% of 100/110/120 volts at all times

Maintains output of selected nominal +/-2% during overvoltages to 138V AC

Maintains output of selected nominal +/-2% during undervoltages to 65V AC (at loads greater than 70% undervoltage correction extends to 80V)

LEDS ALARMS & SWITCHES

Front panel LEDs

LED STATUS DISPLAY: line power (green), on-line (green), bypass (yellow), on battery (green), overload (red), battery low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%). LED display panel easily rotates for better viewing in rackmount or tower configurations.

Alarms

Multi-function audible alarm with distinctive ring patterns offer notification of backup operation (2 seconds on/0.5 seconds off), low battery warning (1.25 seconds on/0.5 seconds off), overload (sounds continuously), UPS fault (4.2 seconds on / 1 second off), input voltage out of frequency (2.1 seconds on/0.14 seconds off) and high input voltage (2.1 seconds on/0.07 seconds off)

Switches

Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions require that the switch be pressed and held for longer than 2 seconds, but less than 4 seconds

SURGE / NOISE SUPPRESSION

AC surge suppression

AC suppression response time

Dataline suppression

EMI / RFI AC noise suppression

PHYSICAL

480joules

Instantaneous

Set of 8-wire RJ style interface jacks offer surge suppression for network ethernet or TEL/DSL connection. Pins 1,2,3 and 6 offer ethernet protection starting at 7.5V and the center two wires, pins 4 & 5, offer TEL/DSL line suppression starting at 260V

Yes

Image 3
Contents Description HighlightsOutput FeaturesSpecifications System OverviewVoltage Regulation BatteryLeds Alarms & Switches InputCommunications Line / Battery TransferSpecial Features EnvironmentalWarranty Related ItemsCertifications 9USTAND Tower Stands

SU1500RTXL2UA specifications

The Tripp Lite SU1500RTXL2UA is a robust uninterruptible power supply (UPS) designed to protect critical electronic equipment from power disruptions. Offering a reliable power backup solution, this model is ideal for servers, networking devices, and sensitive electronic installations.

One of the standout features of the SU1500RTXL2UA is its capacity. With a power rating of 1500VA/1200W, it is capable of supporting the needs of various devices efficiently. This UPS provides ample battery backup time, enabling users to save work, shut down systems properly, or keep essential operations running during power outages.

The UPS incorporates advanced technologies, including line-interactive topology. This design helps maintain continuous power by automatically adjusting to voltage fluctuations, which can help prevent damage to connected devices and prolong their lifespan. Additionally, the SU1500RTXL2UA is equipped with Automatic Voltage Regulation (AVR) capabilities. This feature corrects minor voltage fluctuations without switching to battery, ensuring a stable power supply and reducing the wear and tear on the UPS.

With eight NEMA 5-15R outlets, users have the flexibility to connect multiple devices. The addition of two widely spaced outlets allows for oversized plugs and power adapters. The unit also includes a USB communication port, which integrates easily with monitoring software, providing real-time data on power status and battery condition.

Another significant characteristic is the ability to use a hot-swappable external battery pack (Tripp Lite BP48V24-2U), which can be added to extend the runtime without having to power down connected equipment. This is critical for operations requiring extended support during lengthy outages.

Furthermore, the SU1500RTXL2UA supports user-friendly features, including an LCD display that presents essential information about operating conditions, battery life, and load levels. This allows users to monitor their power environment effectively.

In conclusion, the Tripp Lite SU1500RTXL2UA is designed for reliability and performance. With its combination of power capacity, advanced features, and flexibility, it serves as an essential tool for safeguarding sensitive electronics against power disruptions, ensuring continuous operation and peace of mind for users.