Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains important instructions and warnings that should be followed while installing, operating & storing all Tripp Lite UPS Systems.
UPS Location Warnings
•Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.
•For best performance, keep the indoor temperature between 32° F and 104° F (between 0° C and 40° C).
•Leave adequate space around all sides of the UPS for proper ventilation.
UPS Connection Warnings
•Connect your UPS to a properly grounded AC power outlet. Do not remove or modify the ground connector of your UPS's plug. Do not use
•Do not plug your UPS into itself; this will damage the UPS and void your war- ranty.
•If you are connecting your UPS to a
Equipment Connection Warning
•Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a
Battery Warnings
•Your UPS does not require routine maintenance. Do not open your UPS except to replace batteries. There are no
•Battery replacement should be performed by qualified service personnel. Because the batteries present a risk of electrical shock and burn from high
•The UPS batteries are recyclable. Refer to local codes for disposal require- ments or in the USA only call
•The UPS contains its own energy source (battery). The output terminals may be live even when the UPS is not connected to an AC supply.
•Only connect Tripp Lite battery packs of the correct voltage to your UPS’s external battery connectors.
•Do not connect or disconnect external battery packs while the UPS is operat- ing from battery.
•Do not operate your UPS without batteries.
2