Tripp Lite SMART700DV owner manual Procedure

Page 9

Battery Replacement

Under normal conditions, the original batteries in your UPS will last many years. See Safety section before replacing batteries. The batteries are designed for hot-swap replacement (i.e. leaving the UPS in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode and disconnect equipment before proceeding.

Procedure

1

￿

6

1Remove Front Panel

2Disconnect Batteries

3Remove/Dispose of Batteries

4Add Batteries

5Connect Batteries

Attach connectors: black-to-black and red-to-red.

6 Replace Front Panel

￿2

5￿

￿3

4

9

Image 9
Contents Intelligent, Line-Interactive UPS System SMART700DVUPS Location Warnings Battery WarningsUPS Connection Warnings Equipment Connection WarningsTurn the UPS on Plug your equipment into the UPSUSB and RS-232 Serial Communications ON/OFF/STANDBY Button Buttons Front PanelIndicator Lights Front Panel Other UPS Features Rear Panel Storage ServiceProcedure SMART700DV Page Th Street Chicago, IL 60609 USA