Tripp Lite SMART1000RM1U warranty Specifications, System Overview, Output, Input, Battery

severity and reduces overvoltages by 12%

Network interfaces support simultaneous communications via USB, DB9 serial and SNMPWEBCARD slot

Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP

Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff, activate self-test and load bank output power control

Built in Emergency Power Off (EPO) interface with cable

Sine wave output in AC and battery modes

Half load runtime of 15 minutes (500VA/320 watts)/Full load runtime of 7 minutes (1000VA/640 watts)

Includes 6 NEMA 5-15R output receptacles arranged in 2 switchable single-outlet load banks

Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices

3 stage metered LEDs offer current monitoring and battery charge level

Mains power and voltage regulation LEDs offer at-a-glance power status information

Front panel switches support self-test and alarm cancel functions

UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required

UL (USA), cUL (Canada), NOM (Mexico), FCC Class A (Emissions) listed

2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance

Specifications

SYSTEM OVERVIEW

Voltage compatibility	120 VAC
Frequency	60 Hz
compatibility
OUTPUT
Output VA	1000
Output watts	640
Output nominal	120VAC sine wave output in AC and battery mode
voltage
Output voltage	LINE MODE: Sine wave line voltage 120V (-21% +8%), BATTERY MODE: Sine wave output within 5% of 120VAC
regulation
Output frequency	LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
regulation
Outlet quantity / type	6 NEMA 5-15R
Customized load	"Includes 2 load banks, each with 2 outlets that support automated load shedding and remote reboot on demand of
management	locked network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to
receptacles	increase available runtime for servers and other critical devices. "
Overload protection	Via 15A input breaker
INPUT
Maximum input	9.2A
amps
Input connection	NEMA 5-15P
type
Input cord length	10 ft., 14 gauge
Recommended	15A 120V
Electrical Service
BATTERY
Full load runtime	7 minutes (640 watts)
Half load runtime	15 minutes (320 watts)
DC system voltage	24 VDC
Typical battery	3-6 years, depending on usage
lifespan