AC Input/Output Connection, Service | Tripp Lite 93-2768, 200712159

AC Input/Output Connection

To avoid overloading your Inverter/Charger, match the power requirements of the equipment you plan to run at any one time (add their total watts) with the output wattage capacity of your Inverter/Charger model (see Specifications). Do not confuse “continuous” wattage with “peak” wattage ratings. Most electric motors require extra power at start-up (“peak wattage”) than required to run continuously after start- up, sometimes over 100% more. Some motors, such as in refrigerators and pumps, start and stop intermittently according to demand, requir- ing “peak wattage” at multiple, unpredictable times during operation. DoubleBoost™ Feature: Tripp Lite Inverter/Chargers deliver up to twice their nameplate rated wattage for up to 10 seconds,* providing the extra power needed to cold start heavy-duty tools and equipment. OverPower™ Feature: Tripp Lite Inverter/Chargers deliver up to 150% of their name-plate rated wattage for up to 1 hour,* providing plenty of reserve power to reliably support tools and equipment longer.

* Actual duration depends on model, battery age, battery charge level and ambient temperature.

Connection for Models with Cords and Receptacles

Plug the Inverter/Charger’s AC input cord into an outlet providing 120V AC, 60Hz. power. Make sure that the circuit you connect your Inverter/Charger to has adequate overload protection, such as a circuit breaker or a fuse. Plug your equipment into the Inverter/Charger’s AC receptacles. Any equipment you connect to it will benefit from your Inverter/Charger’s built-in ISOBAR® surge protection!

Warning! Consult a qualified electrician and follow all applicable electrical codes and requirements for hardwire connection. Disconnect both DC input and AC utility supply before attempting hardwiring. Use wire type THHN or equivalent with minimum temperature rating of 90°C.

Connection for Models with Hardwire Terminals

Output Connection Requirement: UL requires that the output terminals of all hard- wire Inverter/Charger models must be connected to UL-listed GFCI receptacles (required receptacle manufacturer/model series: Hubbell GFR5252WA or Leviton 8599). When wiring GFCI receptacles to output terminals, follow the instructions provided with the GFCI receptacles.

Single Input/Output Models

Input: Connect incoming wires to the hot (brown) 2 , neutral (blue) 3 and ground* (green) terminals 1 .

“FOR USE WITH COPPER WIRE ONLY”

HOT IN

2 NEUTRAL IN

3	GROUND	IN
3	GROUND	OUT
	GROUND	OUT
1	HOT OUT
4	NEUTRAL	OUT

Note: Ground Bond Connection, Supplied

Output: Connect outgoing wires to the hot (black) 4 , neutral (white) 5 and ground* (green) terminals 1 .

Replace cover plate and tighten screws.* If the incoming conduit only contains two wires (hot and neutral), the incoming conduit must be bonded to the main ground lug on the unit. In any case, the incoming conduit must be bonded to earth or vehicle ground, and the incoming conduit must be bonded to the outgoing conduit.

Service

Before returning your Inverter/Charger for service, follow these steps: 1.) Review the installation and operation instructions to ensure that the service problem does not originate from a misreading of the instructions. Also, check that the circuit breaker(s) are not tripped.* 2.) If the problem continues, do not contact or return the Inverter/Charger to the dealer. Instead, call Tripp Lite at (773) 869-1234. A service tech- nician will ask for the Inverter/Charger’s model number, serial number and purchase date and will attempt to correct the problem over the phone. 3.) If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. Securely pack the Inverter/Charger to avoid damage during shipping. Do not use Styrofoam beads for packaging.** Any damages (direct, indirect, special, incidental or consequential) to the Inverter/Charger incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. Inverter/Chargers shipped to Tripp Lite or an authorized Tripp Lite serv- ice center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the Inverter/Charger is with- in the warranty period, enclose a copy of your sales receipt. Return the Inverter/Charger for service using an insured carrier to the address given to you by the Tripp Lite service technician.

* This is a common cause of service inquiries which can be easily remedied by following the resetting instructions in this manual. ** If you require packaging, the technician can arrange to send you proper packaging.

Maintenance

Your Inverter/Charger requires no maintenance and contains no user-serviceable or replaceable parts, but should be kept dry at all times. Periodically check, clean and tighten all cable connections, as necessary, both at the unit and at the battery.

200712159, 93-2768 specifications

The Tripp Lite 200712159,93-2768 is a robust power management solution designed to deliver reliable performance, meeting the demands of modern electronic equipment. As a part of Tripp Lite's renowned reputation for quality and innovation, this model incorporates a range of features that cater to both commercial and residential use.

One of the primary highlights of the Tripp Lite 200712159 is its high capacity power distribution capabilities. It is equipped with multiple outlets, allowing users to connect several devices simultaneously without compromising on performance. This is particularly beneficial for environments like offices or server rooms, where multiple pieces of equipment operate concurrently.

Safety is paramount in any electrical device, and the Tripp Lite 200712159 excels in this area. It comes with built-in surge protection, safeguarding sensitive electronic devices against voltage spikes and surges, which can occur during storms or power fluctuations. This protection not only prolongs the lifespan of connected devices but also ensures that data integrity remains intact.

Another notable feature of this model is its compact and ergonomic design. The unit is designed for easy installation and can fit seamlessly into various spaces, whether it’s under a desk or in a rack-mounted system. This flexibility in placement is essential for both aesthetic and practical reasons, allowing users to maintain an organized workspace.

The Tripp Lite 200712159 also incorporates advanced technology like thermal management systems, which help dissipate heat efficiently. By ensuring optimal temperature regulation, it minimizes the risk of overheating and associated problems, thereby enhancing reliability and performance.

Furthermore, this model is compatible with a variety of devices. Its versatile nature allows it to connect with laptops, desktops, printers, routers, and other essential equipment, making it an ideal choice for multi-device setups. The ease of use and straightforward operation make it accessible for individuals regardless of their technical expertise.

In conclusion, the Tripp Lite 200712159,93-2768 stands out as a dependable power management solution, featuring multiple outlets, robust surge protection, and a compact design. Its advanced thermal management and compatibility with various devices ensure it meets the needs of both personal and professional users, making it a valuable addition to any electronic setup. Investing in the Tripp Lite 200712159 means investing in safety, efficiency, and reliability in power management.