Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty.

UPS Location Warnings

•Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.

•For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C).

•Leave adequate space around all sides of the UPS for proper ventilation.

•Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the unit's internal cooling, eventually causing product damage not covered under warranty.

UPS Connection Warnings

•Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS into itself; this will damage the UPS.

•Do not modify the UPS's plug, and do not use an adapter that would eliminate the UPS’s ground connection.

•Do not use extension cords to connect the UPS to an AC outlet. Your warranty will be voided if anything other than Tripp Lite surge suppressors are used to connect your UPS to an outlet.

•If the UPS receives power from a motor-powered AC generator, the generator must provide clean, filtered, computer-grade output.

Equipment Connection Warnings

•Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.

•Do not connect surge suppressors or extension cords to the output of your UPS. This might damage the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles. There are no user-serviceable parts inside the UPS. Battery replacement should be performed only by authorized service personnel using the same number and type of batteries (sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for disposal requirements. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.

200703028, 93-2486 specifications

The Tripp Lite 200703028, also known by its part number 93-2486, is a versatile and reliable solution for power management and connectivity in various environments. Aimed primarily at enhancing productivity and ensuring device safety, this product incorporates a range of features that cater to the needs of users in both commercial and residential settings.

One of the standout features of the Tripp Lite 200703028 is its robust surge protection capabilities. This device is designed to safeguard sensitive electronic equipment from voltage spikes caused by lightning strikes, power outages, or electrical imbalances. With a high joule rating, it can absorb excess energy, thereby prolonging the lifespan of connected devices such as laptops, printers, and networking equipment.

In terms of connectivity, the Tripp Lite 200703028 offers multiple outlets, allowing users to plug in various devices simultaneously. This feature is particularly beneficial in office environments where multiple computers and peripherals may be in use. The intelligently spaced outlets accommodate larger power adapters without blocking adjacent plugs, optimizing available connections.

Another significant characteristic of this product is its compact and space-saving design. Ideal for use in both home and office settings, the Tripp Lite 200703028 easily integrates into workspaces without taking up excessive space. Portability is enhanced through a lightweight construction, making it an excellent choice for individuals who may need to transport their power solutions frequently.

The Tripp Lite 200703028 also incorporates advanced technologies to ensure optimal performance. Its EMI/RFI filtering technology significantly reduces electromagnetic interference, helping to ensure that connected devices operate smoothly and efficiently. This feature is essential in environments where electronic devices must function without disruption.

Ease of use is another noteworthy advantage of this product. Its user-friendly design allows for straightforward installation and operation, making it accessible even for those with limited technical expertise. The inclusion of LED indicators provides real-time status updates on power and surge protection, giving users peace of mind.

In conclusion, the Tripp Lite 200703028, or 93-2486, is an exceptional power management tool that combines advanced surge protection, multiple connectivity options, space-saving design, and user-friendly features. Its robust construction and effective performance make it a preferred choice for enhancing the stability and safety of electrical devices in various settings.