200302105
Owner’s Manual
PR Series
For use in 120V/60 Hz. environments | 1111 W. 35th Street • Chicago, IL 60609 USA |
(773) | |
(PR3, PR3UL, PR4.5, PR7, PR10, PR12, PR15, PR20, |
|
PR25, PR30, PR40, PR50, PR60) |
|
|
|
Applications
Tripp Lite PR series DC power supplies convert standard 120 Volt AC (VAC), 60 Hz. power into regulated 13.8 Volt DC (VDC) power; (12V DC output, nominal). PR series models are ideal for powering a wide range of equipment designed to run on 12V DC power, including CB, Ham and
Important Battery Charging Note: DO NOT use PR series models rated at 12 amps and lower for battery charging. If you connect a battery to any of these models with the unit NOT plugged into a live 120 Volt AC outlet or the unit plugged in but turned OFF, you may burn out the unit because of reverse current flow.
You MAY use PR series models rated at 15 amps and higher for battery charging. However, the battery must be separately fused with a fuse not greater than the value of the unit’s nameplate amperage rating. Otherwise, the battery can cause current flow greater than the unit’s amperage rating back into the unit under certain circumstances and may burn out the unit.
Features
•
•Crowbar Overvoltage Protection: prevents overvoltage surges from damaging connected equipment.
•High Quality Filtering: provides
•
•
•Large Heat Sinks and Vented Cabinet: provides cool, continuos operation and long component life.
•Common Ground and Battery Minus Bonded: contributes to