Tripp Lite B132-004 owner manual Safety Information

Cascaded Installation

4Connect the B132-004 Local Units to the desired number of B132-

100 Remote Units (sold separately) or B132-100-WP Wallplates (sold separately) using Cat5e/6 cable. One B132-100 or B132-100-WP is required for each Output port on the B132-004 Local Units. Note: Remote connection methods will vary. (See the B132-100 or B132-100- WP Owner’s Manual for details.)

5Follow the instructions in the Owner’s Manual that comes with your B132-100 Remote Unit or B132-100-WP Wallplate to complete the installation.

Safety Information

•To reduce the risk of electric shock, do not expose this product to rain or moisture.

•Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fire.

•Use only recommended accessories to avoid fire, shock or other hazards.

•Unplug this product before cleaning. Use a damp cloth for cleaning. Do not use cleaning fluids or aerosols, which could enter the unit and cause damage, fire or electrical shock.

•Do not attempt to service the unit. Instead, disconnect it and contact your Authorized Reseller or technician.

•Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life sup- port equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

6