3. Installation
Before beginning installation, verify that all necessary package contents are present and that the power strip to be mounted conforms to the standards necessitated by its mounting location.
1Secure clamps A loosely to each
end of the power strip B using two
of the M4 screws provided.
Note: If attaching drip shield in next step, mount power strip with power cord down according to the diagram.
A
B
| 1 | |
2 Depending on your application and |
| |
mounting location, you may wish to |
| |
attach the drip shield C to the top |
| |
clamp. Secure the drip shield using |
| |
one M4 screw. To ensure proper fit, | C | |
the top edge of the drip shield will | ||
| ||
rest on top of the clamp. |
| |
Note: Attaching the drip shield is optional. | 2 |
3 Attach the cord wraps D to the clamps using the provided M6 screws. Make sure that the arms face away from the power strip.
D
3
3
5/4/2012 10:05:37 AM |