Specifications

All surge suppressors listed have component response times of less than 1 picosecond.

		Nominal Clamping	Peak Pulse
Model	Description	Voltage	Current
DHUB/DHUB-18V	DHUB: RJ45, 8-port ethernet,	7.5 volts, protecting wires 1-8	750 amps
	token ring RS422/423/485,	on all ports
	AS400/Sys3x protector for
	hubs, repeaters, terminal
	servers, MUXs, MAUs, etc.*
	DHUB-18V: RJ45, 8-port	18 volts, protecting wires 1-8	340 amps
	RS 232 protector for	on all ports
	multiport serial devices.*
DRS232	RJ45/RJ11 protector for	18 volts, protecting	1340 amps
	100Base-T4, RS232 on	wires 1-8
	twisted pair (wires 1-8) or
	ISDN “S/T” interfaces.Supplied
	with 4" RJ45 patch cable.
DNET1	RJ45 100Base-T, 10Base-T,	7.5 volts, protecting wires 1-8	750 amps
	Token Ring, RS422, AS400/
	Sys3x protector for NICs,
	hubs, routers, etc. Supplied
	with 4" RJ45 patch cable.
DSUT1CSU	RJ45/RJ11 protector for	60 volts, protecting wires 1-8	200 amps
	nonspan powered T-1
	equipment, digital data service
	CSUs/DSUs, ISDN “U”
	interfaces or other digital lines.
	Supplied with 4" RJ45 patch
	cable.
DTEL2	RJ45/RJ11 for modems,	260 volts, protecting center	250 amps
	answering and fax	4 wires (2 CO-lines)
	machines. Supplied with
	4" RJ11 patch cable.
DB9	Serial DB9 RS232 protector for	18 volts, protecting pins	340 amps
	male or female ports of data	1-9 and chassis
	terminal and computing
	equipment including PCs,
	modems, etc. (any male or
	female 9 pin port). Male/Female
	genders are reversible with
	reversible thumbscrews.
DB9	DB15 ethernet AU protector	7.5 and 18 volts, protecting all	750 amps
		IEEE 802.3 pins

* Supplied with eight 4” RJ45 patch cables.