Tripp Lite Ultimate Guide to Surge Protectors and the MT-6PLUS Model Features
Page 4

Features

Circuit Breaker (all models)

If the current draw of the equipment connected to the surge suppressor exceeds 15 amps for longer than a few seconds, the circuit breaker will open (trip) to prevent any possible damage. When the circuit breaker trips,the plunger will be extended. Remove the overload and allow the breaker to cool for one minute before depressing the plunger to reset.

Static Discharge (all models except Command Console Compact)

It is recommended that you touch your Under-Monitor Surge Suppressor before starting work at your computer. This will safely dissipate static that can damage sensitive electronic cir- cuitry. Follow the simple procedure outlined below for your model:

(TouchMaster, TouchMaster PLUS): touch the shiny metal plate on the right side of the front panel.

(Power Center, Command Console, Command Console PLUS): touch any metal part of the cabinet.

Diagnostic Indicator Lights

There are up to four LEDs on the front panel that indicate various operating parameters when the unit is plugged into a live 120V AC/60 Hz outlet.

• PROTECTION PRESENT (Green Indicator Light) (all models)

Indicates the surge suppression components are intact and providing full protection against spikes and surges. This LED should be illuminated anytime the MASTER switch is turned ON and power is present as indicated by one of the following:

(TouchMaster, TouchMaster PLUS): Green Indicator Light above the MASTER switch is illuminated.

(Command Console, Command Console PLUS, Power Center):MASTER switch is illuminated.

(Command Console Compact): Red Indicator Light below MASTER switch is illuminated.

If the Protection Present LED does not illuminate, then some of the surge suppression components are not functioning, and the unit should be returned for repair. You may still use the unit. However, connected equipment will be protected from spikes and surges at a lesser level than normal.

• LINE FAULT (Red Indicator Light) (all models except Power Center)

Indicates a wiring fault has been detected. If this LED illuminates at anytime the unit is plugged in,the fault should be repaired by a qualified electrician as soon as possible. This LED indicates that phases are reversed, ground is missing or some other sort of wiring error exists in the circuit the Under-Monitor Surge Suppressor is plugged into. The Line Fault detector circuitry will identify most common wiring faults, but will not necessarily detect every possible type of fault.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Positioning Your UNDER-MONITOR Surge Suppressor Under-Monitor Surge SuppressorsConnecting Your UNDER-MONITOR Surge Suppressor Connection to AC Power Line all modelsIntroduction Connection To Telephone Line Plus models onlyConnecting Your Equipment Command Console CompactSwitched Outlets Unswitched Outlets not available on Power CenterDiagnostic Indicator Lights FeaturesCircuit Breaker all models Front Panels Front Panel FeaturesTouchMaster TouchMaster Plus Battery Selection Telephone Line Specifications Plus Models only SpecificationsALL Models Warranty Valid for ALL Models Except Power Center PC5
Related manuals
Manual 1 pages 46.08 Kb

MT-6, MT 6PLUS, CCC4, PC 5, CCI 6 specifications

The Tripp Lite Touchmaster Compact, designated CCI6PLUS, is a versatile and innovative product designed to meet the demanding needs of modern professionals seeking both functionality and convenience in their technology. This compact unit merges cutting-edge technology with user-friendly features, making it a valuable addition to various work environments.

One of the standout features of the CCI6PLUS is its capacitive touch screen, which allows for intuitive navigation and control. The responsive display enables users to easily access settings, adjust configurations, and monitor performance in real time. The compact design not only saves valuable workspace but also makes it portable and easy to integrate into different setups, whether in a home office, corporate environment, or while on the go.

Connectivity is a key aspect of the CCI6PLUS, with multiple ports available for a range of devices. This unit supports a variety of input and output types, including USB connections, ensuring compatibility with a wide array of peripherals. Its ability to connect to different platforms enhances its usability in diverse scenarios, from presentations to collaborative projects.

Another critical technology featured in the Touchmaster Compact is its advanced power management capabilities. The device offers surge protection, ensuring that connected equipment is safeguarded against power fluctuations. This feature is particularly advantageous for users in areas prone to electrical instability or during inclement weather. Additionally, the CCI6PLUS incorporates energy-efficient technology, reducing power consumption without compromising performance.

The build quality of the CCI6PLUS is robust, designed to withstand the rigors of everyday use while maintaining a sleek and professional aesthetic. Its lightweight construction ensures that it is easily movable, making it suitable for users who travel frequently or shift their workspace often.

Furthermore, the unit’s user interface is designed with accessibility in mind, offering features that cater to users of varying technological proficiency. Setup is straightforward, and comprehensive instructions make it easy for anyone to get started quickly.

In summary, the Tripp Lite Touchmaster Compact CCI6PLUS combines a responsive touch screen, versatile connectivity options, advanced power management and a durable yet portable design. Whether for professional use or personal projects, this compact unit is an excellent choice for those looking to enhance their productivity and technology experience.
Top Page Image Contents