Philips MX5800SA/21 manual Setting the digital output Setting the PCM output

DVD Menu Options

Setting the digital output Setting the PCM output

s h

Set Digital Output according to your optional audio equipment connections.

Follow the steps of “Using the Setup Menu” and select :

> Digital output

1en 1en1st

Digital output	Off
Analog output	PCM only
	All
Night mode

Karaoke vocal

Speaker layout

Speakers

PCM output

Off

Select this to deactivate the digital output.

All

Select this if you have connected the digital output to an optional piece of audio equipment that has a multichannel decoder.

PCM only

Select this if the optional audio equipment is not capable of decoding multichannel audio. After that, proceed to “Setting the PCM output”. Once you select ‘PCM only’. the surround mode will automatically change to ‘STEREO’.

Set your PCM (Pulse Code Modulation) output only after you have set the system’s Digital Output to ‘PCM only’. (See “Setting the digital output”).

Follow the steps of “Using the Setup Menu” and select :

> PCM output

1en	1en	1	st
Digital output
Analog output
Night mode
Karaoke vocal
Speaker layout
Speakers
PCM output		48 kHz
		96 kHz

48 kHz

Select this if the optional audio equipment is incapable of processing 96 kHz digital signal input. The signal will then be converted to a standard signal with sampling rates of 48 kHz.

96 kHz

Select this if the optional audio equipment is capable of processing digital signal input with sampling rates of 96 kHz. However, if the sound output is distorted or there is no sound, select ‘48 kHz’ instead.

E n g l i

33