Fender SPL-M500 owner manual Kl L M N O O, Rear Panel

Page 5

DO NOT BLOCK FAN OPENING

 

 

TYPE: PR 308

 

 

 

 

 

 

 

OUTPUTS

PATCH POINT

BALANCED INPUTS

900W

 

SERIAL NUMBER

PARALLEL SPKR. JACKS

RETURN

SEND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

500W

 

 

 

 

FUSE

 

2Ω

 

 

 

 

F10A

 

 

 

 

 

 

MIN

 

 

 

 

250V

CAUTION: CHASSIS SURFACE HOT

 

 

 

 

TOTAL

 

 

 

 

 

WARNING: TO REDUCE THE RISK OF FIRE

 

 

 

ATTENTION:

CAUTION:

OR ELECTRIC SHOCK , DO NOT EXPOSE THIS

 

 

 

 

EQUIPMENT TO RAIN OR MOISTURE

CLASS 2 WIRING

 

 

 

AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

 

 

 

UTILISER UN FUSIBLE DE

TO REDUCE THE RISK OF

 

 

 

 

RECHANGE DE MEME

FIRE, REPLACE FUSE WITH

ATTENTION: SUPERFICIE DE CHASSIS CHAUDE

 

 

 

 

TYPE ET CALIBRE

SAME TYPE AND RATING

 

 

 

 

J KL L M N O O

H. PEAK LED INDICATOR - The red Peak LED Indicator illuminates when the output voltage of the amplifier reaches clipping (maximum output voltage). The threshold for the peak indicator automatically adjusts for load impedance and supply voltage variations.

I. POWER SWITCH - The power switch turns the unit on and off. The LED (item F) is illuminated when the amplifier is turned on and main voltage is present.

REAR PANEL

J.POWER CORD - The SPL-M500 is equipped with a grounding type supply cord to reduce the possibility of shock hazard. Be sure to connect it to a grounded AC receptacle. DO NOT ALTER THE AC PLUG.

K.EXTERNAL FUSE - When necessary, replace the external fuse ONLY with one of the same type and rating as shown on the label next to the external fuse holder.

L.OUTPUT SPEAKER JACKS - Two parallel-wired,

1/4"output connectors are provided capable of providing 500 Watts of power into a 2Ω minimum load total. (One 2Ω speaker or two speakers at 4Ω each).

M. PATCH POINT RETURN CONNECTOR - Provides the possibility of using the power amplifier by bypassing the preamp section of the unit. When this connector is used, the preamp is totally disconnected from the power amplifier section. If nothing is plugged into this jack, it normally takes its signal from the preamp output, via the PATCH POINT SEND jack. (See section N).

N. PATCH POINT SEND CONNECTOR - This connection can be used with the patch point return connector, if further signal processing by an external unit is desired. Processing could include the insertion of a 1/3 octave graphic equalizer for tonal shaping, an external compressor/limiter and/or the insertion of an active electronic crossover network for bi-amped monitor systems. The output of this jack is normally tied to the patch point return connector. Using this connector will not disconnect the preamp section from the power amplifier section.

O. BALANCED INPUT CONNECTORS - This unit provides two types of input connectors: a 1/4 inch TRS and an XLR female connector. The 1/4 inch TRS connector polarities are: tip (+), ring (-), and sleeve (ground). The XLR female connector polarities are: pin 2 (+), pin 3 (-), and pin 1 (ground).

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Power Amplifiers Bill Schultz Stage Monitor Power Amplifier Front Panel Description of FeaturesC B C B C D G H Rear Panel KL L M N O O100-UP 50-100 Amplifier Operation Hints and PrecautionsSpecifications

SPL-M500 specifications

The Fender SPL-M500 is a premium solid-state combo amplifier designed for a range of musical applications, offering guitarists exceptional tone quality and versatility. This 500-watt powerhouse is ideal for both stage and studio use, catering to the needs of diverse musical genres.

One of the main features of the SPL-M500 is its powerful output, delivering an impressive 500 watts of clean sound. This ample power allows musicians to fill large venues without sacrificing clarity or volume. The amplifier is equipped with a specially designed high-frequency driver and a robust woofer, ensuring a full-spectrum sound that captures every nuance of the performance.

The SPL-M500 incorporates advanced sound shaping technologies, giving guitarists the freedom to tailor their tone. Its three-channel design includes a dedicated clean channel, a lead channel with overdrive capabilities, and a third channel that supports various effects. The built-in EQ section features customizable bass, mid, and treble controls, allowing players to sculpt their unique sound easily. Additionally, the amplifier includes an effects loop for integrating external effects processors, enhancing the sound further.

Durability is a hallmark of the SPL-M500, with a rugged construction that can withstand the rigors of frequent use. Its sturdy cabinet is designed to reduce vibrations and reinforce sound integrity, while the grille cloth provides both protection and style. The amplifier is also equipped with a dependable cooling system, ensuring optimal performance even during prolonged use.

For those who appreciate connectivity, the SPL-M500 is equipped with multiple inputs and outputs. It includes a balanced XLR output for direct-to-mixer connections, making it easy to integrate into any live sound setup. The amplifier also features a headphone jack, allowing for discreet practice and late-night sessions without disturbing others.

Overall, the Fender SPL-M500 stands out with its powerful sound, versatility, and user-friendly features. Whether you’re a performing artist or a studio musician, this amplifier offers an impressive array of tools to help you unleash your creativity and elevate your playing experience.
Top Page Image Contents