Tripp Lite B118-304-R, B118-302-R Introduction, Installation, Product Features, Package Contents

Page 2

1. Introduction

Tripp Lite HDMI v1.3 Splitters broadcast a signal from an HDMI source to multiple HDMI displays. Up to 64 displays can be connected by cascading additional splitters.

Product Features

Connects to both HDMI and DVI-D single link* displays

Compatible with 720i, 720p, 1080i and 1080p resolutions

HDMI v1.3 and HDCP compliant

Permits display to be located up to 130 ft. (40 m) or more** from the source

Package Contents

B118-302-R or B118-304-R HDMI v1.3 Splitter

Power Adapter

Owner’s Manual

*Using a Tripp Lite P566-Series HDMI to DVI-D Single Link adapter cable (sold separately). DVI monitors will not provide audio when receiving a signal from the splitter.

** Longer ranges are possible by using higher-gauge cable, or at resolutions lower than 1080p. Contact Tripp Lite for more information.

2. Installation

2.1 Standalone Installation

B118-302-R2-Port Splitter: Connect the splitter’s integrated cable to the HDMI source.

B118-304-R4-Port Splitter: Connect a Tripp Lite P568-series HDMI cable* from the HDMI Source to the HDMI Input Port on the splitter.

Connect a Tripp Lite P568-series HDMI Male-to-Male cable from the Output Port of the splitter to the HDMI or DVI** display. Repeat this step for each additional display. The Output Port LED will illuminate when the port is connected to a powered-on display.

Connect the included power adapter from the splitter to an appropriate power source. It is recommended that the power adapter be plugged into a Tripp Lite surge suppressor. The Power LED (B118-304-R only) will illuminate when the splitter is plugged into a power source. Note: Use only the power adapter that is included with your unit.

*Sold separately. Maximum Length - 16 ft.

**Using a Tripp Lite P566-series HDMI to DVI-D Single Link adapter cable (sold separately). DVI monitors will not provide audio when receiving a signal from the splitter.

2.2 Cascaded Installation

The B118-302-R and B118-304-R are designed to cascade up to 3 levels, allowing you to connect to up to

64 displays (when cascading three levels of B118-304-R splitters). The B118-302-R and B118-304-R can be cascaded together, providing more flexibility when expanding the number of connected displays.

Source

B118-304-R

B118-304-R

B118-304-R

 

 

 

TV Display

All cables are Tripp Lite P568-series HDMI M/M cables:

 

 

maximum length 16 ft. ( Part # P568-016)

 

maximum length 25 ft. ( Part # P568-025)

 

 

 

 

 

 

 

 

2

Image 2
Contents Hdmi Splitters West 35th Street Chicago, ILPackage Contents InstallationProduct Features IntroductionSuggested Setup Extended Cascaded Installation To perform a cascaded installationSuggested Setup Extended Standalone Installation All cables are Tripp Lite P568-series Hdmi M/M cablesYear Limited Warranty TroubleshootingWarranty and Warranty Registration Warranty RegistrationDivisores Hdmi Características del producto IntroducciónInstalación Contenido del paqueteConfiguración sugerida Instalación en cascada extendida Para realizar una instalación en cascadaConfiguración sugerida Instalación independiente extendida Si la imagen no se visualiza correctamente Solución de problemasGarantía Garantía limitada de un añoRépartiteurs Hdmi Th Street Chicago, IL 60609 USAPièce N P568-016 Pièce N P568-025 Caractéristiques du produitContenu de lemballage Configuration suggérée Installation autonome étendue Installation suitePour effectuer une installation en cascade Configuration suggérée Installation étendue en cascadeSi limage ne saffiche pas correctement DépannageGarantie Garantie limitée de 1 an
Related manuals
Manual 2 pages 26.07 Kb Manual 2 pages 16.67 Kb