Philips MX3800D/22S Other Functions, Tuning to radio stations Listening to preset radio, Stations

Page 22

E n g l i s h

Other Functions

 

Tuning to radio stations

 

Listening to preset radio

1

Press STANDBY ON to switch on the last selected

 

stations

 

source.

In tuner mode, press 1 or 2 or use the numeric keypad

2

Adjust SOURCE (or press TUNER) to select TUNER

 

(0-9)to select the desired preset number.

 

mode.

 

The preset number, radio frequency, and waveband are

3

Press TUNER again to select the desired band : FM, MW

 

displayed.

 

or LW.

 

 

4Press and hold S or T until the frequency indication starts to change, then release.

The system automatically tunes to the next strong radio station.

To tune to a weak station, press S or T briefly and repeatedly until an optimal reception is found.

5Repeat step 4 if necessary until you find the desired radio station.

Presetting radio stations

You can preset up to 40 stations regardless of the reception.

1Tune to your desired radio station (refer to “Tuning to radio stations”).

2Press PROGRAM.

“Program” appears.

Program

3Use the numeric keypad (0-9)to select the desired preset number.

Sleep timer setting

The sleep timer enables the system to switch to standby mode automatically at a preset time.

1Press SLEEP repeatedly to select a preset time.

The selections are as follows (time in minutes):

15 30 45 60 90 120OFF 15...

2When you reach the desired length of time, stop pressing the SLEEP button.

“Sleep” icon appears.

To check the remaining length of time after sleep timer is activated

Press SLEEP once.

To change the preset sleep timer

Press SLEEP again while the remaining sleep timer is shown.

The display will show the next sleep timer options.

To deactivate the sleep timer

Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.

Program

Note:

If “Program” icon goes off before you select the desired preset number, press PROGRAM again.

4Press PROGRAM again to store the radio station.

Repeat steps 1–4to store other radio stations.

Notes:

If you attempt to programme more than 40 preset radio stations, "FULL" is displayed.

During programming, if no key is pressed within five seconds, the system will exit the programme mode automatically.

22OTHER FUNCTIONS

pg 001-024/MX3800/22-Eng

22

4/23/02, 9:01 AM

Image 22
Contents MX3800D Klass 1 laseraparat Important NoteDichiarazione DI CONFORMITA’ Luokan 1 laserlaiteNederlands Deutsch Español IndexFrançais English Por tuguês Suomi Dansk Svenska Italiano 205Laser Contents Introduction and General Information Functional Overview Front and Rear panelsRemote Control FM Indoor Antenna Connecting antennasMW Indoor Loop Antenna FM Outdoor AntennaSpeaker cables Connecting a TV and additional componentsGlis OptionPreparations Switching on the systemSetting up the surround sound system G l i s hSystem Setup DVD Setting up the subwooferYour surround sound needs Ntsc PALRating no Parent Rating 1 toBasic Functions Selecting the surround sound modeSelecting the digital sound effect Adjusting the tone Volume controlDimming the display screen Discs information OperationsBasic playback Special DVD/VCD features For VCD Special VCD/SVCD features Screen and to pan through the enlarged imageIf the MP3-CD menu is switched off Special MP3-CD featuresMP3-CD menu Sleep timer setting Tuning to radio stations Listening to preset radioPresetting radio stations Other FunctionsSpecifications Amplifier SectionTroubleshooting No picture