Tripp Lite B064-016 owner manual Hotkey Command Summary Table, Action Hotkey Command, Ctrl, F12

Installation

Hotkey Command Summary Table

Action	Hotkey Command
Activate Hotkey Setting Mode	Press and hold the [Num Lock] key, press and release the
	minus [-]key, release the [Num Lock] key.
Change Hotkey Setting Mode activation command to	Activate Hotkey Setting Mode, [H]
[Ctrl], [F12]
Toggle OSD Menu Activation command between [Scroll	Activate Hotkey Setting Mode, [T]
Lock] [Scroll Lock], [Ctrl] [Ctrl] and [Alt] [Alt]	Note: When using [Ctrl] [Ctrl] or [Alt] [Alt], you must hit the
	same [Ctrl] or [Alt] key both times
Selecting the active port	Activate Hotkey Setting Mode, [Port ID], [Enter]
Initiate an Auto Scan	Activate Hotkey Setting Mode, [A], [Enter]. Press the [P] key
	to pause, and the [Esc] key or [Spacebar] key to exit. When
	paused, pressing any key will resume scanning.
Initiate an Auto Scan at a desired time interval	Activate Hotkey Setting Mode, [A], n, [Enter]
	Note: n is a Scan Interval from 1 to 255 seconds. Press the
	[P] key to pause, and the [Esc] key or [Spacebar] key to
	exit. When paused, pressing any key will resume scanning
Initiate Skip Mode and go to the next port	Activate Hotkey Setting Mode, [g]
	Note: Once in Skip Mode, press an arrow key [i, h, g, f] to
	skip through ports. Press the [Esc] key or [Spacebar] key to
	exit
Initiate Skip Mode and go to the previous port	Activate Hotkey Setting Mode, [f]
	Note: Once in Skip Mode, press an arrow key [i, h, g, f] to
	skip through ports. Press the [Esc] key or [Spacebar] key to
	exit
Initiate Skip Mode and go to the last port in the installation	Activate Hotkey Setting Mode, [h]
	Note: Once in Skip Mode, press an arrow key [i, h, g, f] to
	skip through ports. Press the [Esc] key or [Spacebar] key to
	exit
Initiate Skip Mode and go to the first port in the installation	Activate Hotkey Setting Mode, [i] Note: Once in Skip Mode,
	press an arrow key [i, h, g, f] to skip through ports. Press
	the [Esc] key or [Spacebar] key to exit
Computer Keyboard/Mouse Reset	Activate Hotkey Setting Mode, [F5]
Turning Beeper On/Off	Activate Hotkey Setting Mode, [B]
Setting port operating system (Administrator only)	Activate Hotkey Setting Mode, [F1, F2 or F3]
	[F1] sets the OS to Windows, [F2] to Mac and [F3] to Sun
Restore the OSD default values (Administrator only)	Activate Hotkey Setting Mode, [R], [Enter]

12