Tripp Lite 932845 owner manual Warranty Registration, Screen Resolutions Higher than 1280 x

Page 45

14.Appendix (continued)

14.4Screen Resolutions Higher than 1280 x 1024

The maximum screen resolution of the NetDirector Console KVM Switch with IP Access integrated LCD monitor is 1280 x 1024. In order to protect it from being damaged by resolutions that are beyond its display capability, we recommend that the screen resolutions of the connected computers be set to 1280 x 1024 or lower.

If you wish to display screen resolutions higher than 1280 x 1024, follow the procedure described below to change the computers’ screen resolutions and safeguard the KVM switch’s LCD monitor:

Note: • We strongly recommend that you close the KVM switch’s LCD console before continuing.

Using the LCD monitor to view computers that are set to resolutions that exceed its maximum capability can damage it and shorten its life span.

To access computers from the local console when the integrated console is closed, simply connect an external KVM console with a monitor that supports 1600 x 1200 @ 60 Hz to the KVM switch’s external console ports.

14.5 About HD15 Connectors

From a remote computer, log into the KVM switch and access the computer whose screen resolution you wish to change.

1.Open the computer’s Control Panel and double-click Display. The Display Properties dialog box appears.

2.Click the Settings tab, and then click Advanced.

3.In the dialog box that appears, click the Monitor tab.

4.Under Monitor settings, click to clear the Hide modes that this monitor cannot display check box.

5.Click Apply.

6.Click the Adapter tab, and then click List All Modes. The List All Modes dialog box appears.

7.Under List of valid modes, select the display mode that you want the computer to use.

Note: The maximum screen resolution and refresh rate that the KVM switch supports for remote computers is 1600 x 1200@60 Hz.

8.Click OK, and then click Apply. The display mode changes to the one you selected.

9.If the Monitor Settings dialog box appears requesting you to confirm the settings change, click Yes.

10.After the Monitor Settings dialog box closes, click OK.

11.In the Display Properties dialog box, click OK.

This completes the procedure. Repeat these steps for any other computer whose screen resolution you wish to change.

This product uses HD15 connectors for its KVM and/or Console ports. We have specifically modified the shape of these connectors so that only KVM cables that we have designed to work with this product can be connected.

15. Warranty

1-YEAR LIMITED WARRANTY

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way. EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

16. Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

The policy of TRIPP LITE is one of continuous improvement. Specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

201002029 93-2845

45

Image 45
Contents Th Street, Chicago, IL 60609 USA Console KVM Switch With IP AccessTable of Contents Java Client Warranty Warranty RegistrationLog File Log ServerFCC Information Package ContentsUser Notice IntroductionSystem Requirements FeaturesSupported operating systems are shown in the table, below ComponentsLCD Module Installation General Safety InstructionsRack Mounting Two-Stage Installation Single-Stage InstallationStandard Rack Mounting Standard Rack MountingOpening the Console Basic OperationAdjustment Settings LCD OSD ConfigurationClosing the Console LCD ButtonsAdministration Choice Meaning MainPort Operation Setting Function ConfigurationAs Quick View ports Quick View + Powered on Scroll Lock Scroll Lock or Ctrl Ctrl. SinceGeneral AdministrationDescription Heading DescriptionLog Server Access PortField Explanation HttpRadius Server Access Rights Network Transfer Rate Check Enable RadiusIP Address DNS ServerDefault Webpage Name IP and MAC FilteringUSM0 All Login Failures AdministationWorking Mode MiscellaneousUpgrading the Firmware Reset On Exit Minutes before logging backLog Parameter ExplanationBrowser Operation LoggingTo log in from an Internet browser Webpage Icons Webpage LayoutGeneral Dialog Box Webpage ButtonsActivating the OSD Windows ClientWindows Client Control Panel Windows Client OSDDialog box. See .1, Activating the OSD, for details Click to exit the remote viewIcon Purpose Default Hotkey Gamma Adjustment Option UsageRGB Message Display Panel Button BarCompose Panel User List PanelOSD Toolbar Icons Multiuser Operation Keyboard and Mouse Considerations Java ClientJava Client Control Panel Java Client OSDWindows XP / Windows Server WindowsWindows ME / Windows Windows NT / WindowsMessage Board Button Bar Log File on Remote Main Log FileInstallation Log ServerStarting Up Menu Bar MaintenanceSearch Field ExplanationLog Server Main Screen KVM switch’s OSD see sectionList Panel ConnectionWindows Client AP OperationTerm Explanation Click DisconnectFile Menu Tools MenuAllows the user to create a named work file so its Ending the Session Java ClientOSD Factory Default Settings SpecificationsSetting Default AppendixWhen viewing a computer with a high screen TroubleshootingResolution from a remote computer, I can’t see Entire desktop View the rest of the desktopMdac 2.7 RTM Refresh Warranty Registration WarrantyScreen Resolutions Higher than 1280 x About HD15 Connectors