Philips HTS8141 Listen to radio, Search and store radio stations individually, Change tuning grid

Listen to radio

1Press RADIO repeatedly to select ‘FM’ or ‘AM/MW’ band.

2Use the remote control to control the radio.

Button	Action
	Select a preset radio station.
m M	Tune the radio frequency
	backward/ forward.
	Toggle between FM stereo
	and FM mono mode.
	Press and hold this button to
	delete the preset station from
	the preset list.

•The preset number for other radio stations remain unchanged.

Search and store radio stations individually

1Press RADIO repeatedly to select ‘FM’ or ‘AM/MW’ band.

2Press m M.

￿The radio frequency indication starts to change until a radio station is detected.

3Repeat step 2 until you tune to the radio station you wish to store.

•To netune the radio frequency, press vV.

4Press PROGRAM.

•If no action is carried out within 20 seconds after the above step, it exits the preset mode.

5Press í ë (or the number buttons) to select a preset number to store.

6Press PROGRAM to con rm.

Reinstall all the radio stations

1Press RADIO repeatedly to select ‘FM’ or ‘AM/MW’ band.

2Press and hold PROGRAM until ‘STARTING INSTALL’ is displayed.

￿All previously stored radio stations will be replaced.

Note

•If no stereo signal is detected or less than 5 stations are detected during radio installation, ‘CHECK ANTENNA’ is displayed.

Change tuning grid

In some countries, the frequency step between adjacent channels in FM band is 50 kHz or

100 kHz (AM/MW band is 9 kHz or 10 kHz).

Note

•This feature only applicable for certain region.

•Change tuning grid erases all preset radio stations.

1 Press RADIO repeatedly to select ‘FM’ or ‘AM/MW’ band.

2Press x.

3Press and hold u until ‘GRID 9’ or ‘GRID 10’ is displayed.

•‘GRID 9’ for FM 50 kHz (or AM 9 kHz) and ‘GRID 10’ for FM 100 kHz (or AM 10 kHz).

34EN