Overview, Easy Troubleshooting | Moxa Technologies 5100 instruction

Serial Device Servers

Small size

Real COM/TTY drivers for Windows and Linux

Standard TCP/IP interface and versatile operation modes

Easy-to-use Windows utilty for mass installation

Built-in 15 KV ESD protection for all serial signals

SNMP MIB-II for network management

Configuration by Telnet or web browser

Adjustable termination resistor for the RS-485 port

Overview

NPort 5100 device servers are designed to make industrial serial	IP-based Ethernet LAN. With NPort device servers, your devices can
devices instantly Internet-ready. Their small size makes them ideal for	be made accessible to your software from anywhere on the local LAN
connecting devices such as card readers or payment terminals to an	or the Internet.

Using serial-to-Ethernet to connect legacy serial devices to Ethernet is	functions, and are high quality. With its full support of Microsoft and
no longer a novel solution. Users now expect to be able to find device	Linux operating systems and solid 5-year warranty, NPort 5100 is one
servers that are cost-effective, provide a broad selection of different	of the best device server solutions in the worldwide industrial market.

In some critical environments, termination resistors may be needed	values is universally compatible for all environments, NPort 5100
to prevent the reflection of serial signals. When using termination	device servers allow user adjustment of termination and pull high/low
resistors, it is also important to set the pull high/low resistors correctly	resistor values for each serial port, using jumpers.
so that the electrical signal is not corrupted. Since no set of resistor

The NPort 5110 can operate in TCP Server, TCP Client, UDP	compatibility with software based on a standard network API (Winsock,
Server/Client, Pair Connection, or Ethernet Modem mode, ensuring	BSD Sockets).

With the Real COM/TTY drivers that are provided with each NPort,	an excellent way to preserve your software investment and enjoy the
software designed for communication with COM/TTY ports can be	benefits of networking your serial devices, with no fuss.
instantly and seamlessly integrated into a TCP/IP network. This is

NPort 5100 device servers support SNMP V2, which can be used to	e-mail alert can be sent instead. Users can define the trigger for those
monitor all units over Ethernet. Each unit can be configured to send	alerts using MOXA’s Windows utility or the web console. For example,
trap messages automatically to the SNMP manager when user-defined	alerts can be triggered by a warm start, a cold start, or a change in
errors are encountered. For users who do not use SNMP manager, an	password.

3-15

www. moxa . com

e - mail: info@moxa . com