Moxa Technologies TN-5308 manual Auto-Negotiation and Speed Sensing, Specifications, Technology

Page 12

Auto-Negotiation and Speed Sensing

All of the TN-5308’s Ethernet ports independently support auto-negotiation for speeds in the 10BaseT and 100BaseTX modes, with operation according to the IEEE 802.3u standard. This means that some nodes could be operating at 10 Mbps, while at the same time, other nodes are operating at 100 Mbps.

Auto-negotiation takes place when an M12 cable connection is made, and then each time a LINK is enabled. The TN-5308 advertises its capability for using either 10 Mbps or 100 Mbps transmission speeds, with the device at the other end of the cable expected to advertise in the same way. Depending on what type of device is connected, this will result in agreement to operate at a speed of either 10 Mbps or 100 Mbps.

If a TN-5308’s Ethernet port is connected to a non-negotiating device, it will default to 10 Mbps speed and half-duplex mode, as required by the IEEE 802.3u standard.

Specifications

Technology

 

Standards

IEEE 802.3 for 10BaseT

 

IEEE 802.3u for 100BaseT(X)

 

IEEE 802.3x for Flow Control

Processing Type

Store and Forward

Flow Control

IEEE802.3x flow control, back pressure flow

 

control

Interface

 

M12 Ports

10/100BaseT(X) auto negotiation speed, F/H duplex

 

mode and auto MDI/MDI-X connection

LED Indicators

PWR, 10/100M

Power Requirements

 

Input Voltage

TN-5308-LV: 12/24/36/48 VDC (7 to 60 VDC)

 

TN-5308-MV: 72/96/110 VDC (50.4 to 154 VDC)

Input Current

TN-5308-LV: 0.19A @ 12 VDC, 0.10A @ 24 VDC,

 

0.054A @ 48 VDC

 

TN-5308-MV: 0.033A @ 72 VDC, 0.024A @ 96

 

VDC, 0.021A @ 110 VDC

Connection

TN-5308-LV: M12 A-coding, 5-pin male connector

 

TN-5308-MV: M23 A-coding, 5-pin male connector

Overload Current

Present

Protection

 

Reverse Polarity

Present

Protection

 

Physical Characteristics

 

Housing

Metal, IP40 protection

Dimensions (W × H × D) TN-5308-LV: 60 x 216.6 x 36.1 mm (2.36 x 8.53 x 1.42 in) TN-5308-MV: 60 x 216.6 x 53.7 mm (2.36 x 8.53 x 2.11 in)

11

Image 12
Contents Moxa ToughNet Switch Package Checklist FeaturesOverview TN-5308-LV Panel Layouts TN-5308-MV Panel Layouts Mounting Dimensions unit = mm TN-5308-MVPanel/Wall Mounting DIN-Rail Mounting optionalWiring Requirements Safety FirstGrounding the TN-5308 Connecting the Power Supply Pinouts for the power input port on the TN-5308-LVPinouts for the power input port on the TN-5308-MV Connecting the Data Lines M12 4-pin, M to M12 4-pin, M Cross-Over Cable WiringPinouts for the 10/100BaseTX Ports on the TN-5308 Pinouts for the RJ45 8-pin PortM12 4-pin, M to M12 4-pin, M Straight-Trough Cable Wiring M12 4-pin, M to RJ45 8-pin Cross-Over Cable WiringM12 4-pin, M to RJ45 8-pin Straight-Trough Cable Wiring Auto MDI/MDI-X ConnectionDual Speed Functionality & Switching Switching and Address LearningSwitching, Filtering, and Forwarding LED IndicatorsSpecifications Power RequirementsAuto-Negotiation and Speed Sensing TechnologyEnvironmental Limits Regulatory ApprovalsTechnical Support Contact Information