Moxa Technologies EDS-728/828, EDS-828 manual Uninstalling IM-2G Modules, Step

Page 6

STEP 2:

Mounting the EDS-728/828 on the wall requires 4 screws to ensure that the switch does not come loose from the wall. Use the switch, with wall mounting plates attached, as a guide to mark the correct locations of the 4 screws. The heads of the screws should be less than 6.0 mm in diameter, and the shafts should be less than 3.5 mm in diameter, as shown in the figure at the right.

6.0 mm

3.5 mm

NOTE Before tightening the screws into the wall, make sure the screw head and shank size are suitable by inserting the screw into one of the keyhole-shaped apertures of the Wall Mounting Plates.

Do not screw the screws in all the way—leave about 2 mm to allow room for sliding the wall mount panel between the wall and the screws.

STEP 3: Once the screws are fixed in the wall, insert the four screw heads through the large parts of the keyhole-shaped apertures, and then slide Moxa EDS downwards, as indicated. Tighten the four screws for added stability.

EtherDevice Switch

EDS-728/828

EtherDevice Switch

EDS-728/828

Uninstalling IM-2G Modules

As shown in the figure below, use a flat-blade screw driver as a lever, and pull or push it to force the IM-2G module outwards. Then pull the module out away from the EDS-728/828.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Moxa EtherDevice Switch First Edition, JanuaryPanel Layout of EDS-728/828 Series Page Mounting Dimensions unit = mm To Install Wall Mounting optionalTo Release Uninstalling IM-2G Modules StepWiring Requirements Grounding Moxa EtherDevice SwitchWiring the Relay Contact Wiring the Redundant Power Inputs Wiring the Digital InputsCommunication Connections RS-232 ConnectionLED LED IndicatorsFault Color StateLNK/ACT MasterColor FDX/HDXPWR SpecificationsModular Managed Switch System EDS-72810G/82810G TechnologyPower Gigabit Ethernet Interface Module, IM-2G SeriesMechanical LHX Fast Ethernet Interface Module, IM seriesOptical Fiber/SFP-1GxxxLC Series 10A 10B 20A 20B 40A 40BIM-1LSC/3TX Optical FiberEnvironmental Moxa Internet ServicesWarranty Regulatory Approvals

EDS-828, EDS-728/828 specifications

Moxa Technologies is renowned for its advanced networking solutions, and the EDS-728 and EDS-828 series of Ethernet switches exemplify this commitment. Designed specifically for industrial environments, these switches deliver exceptional performance, reliability, and versatility, making them ideal for various applications, including factory automation, traffic management, and public utilities.

One of the standout features of the EDS-728 and EDS-828 switches is their robust design. They operate efficiently across a wide temperature range from -40°C to 75°C, ensuring reliable performance in harsh conditions. This thermal endurance is complemented by a fanless design, which minimizes potential points of failure, making the switches suitable for environments where dust and vibrations are prevalent.

These switches come equipped with Gigabit Ethernet ports, providing high-speed data transmission crucial for demanding network applications. The EDS-728 features 8 ports, while the EDS-828 offers 24 ports, allowing for flexible network expansion according to user needs. Both models support a range of protocols, including IEEE 802.1Q VLAN for traffic segmentation, which enhances network efficiency and security.

In terms of network resilience, the EDS series utilizes redundant power inputs with a wide voltage range (12 to 48V DC) to prevent any downtime. In addition, they support various redundancy protocols like MRP (Media Redundancy Protocol) and RSTP (Rapid Spanning Tree Protocol), ensuring continuous data flow even in the event of a link failure.

Security is also a key consideration in the design of the EDS-728 and EDS-828. They support advanced security features such as IEEE 802.1X port-based authentication and Access Control Lists (ACLs), safeguarding the network against unauthorized access and potential cyber threats.

The user-friendly interface of these switches facilitates easy configuration and monitoring. Moxa’s MXview network management software enhances this usability, allowing users to visualize their network topology in real-time, manage configurations, and troubleshoot potential issues promptly.

Additionally, the EDS series is compliant with various international safety and electromagnetic compatibility (EMC) standards, ensuring they can be deployed globally without concerns regarding compliance.

Overall, Moxa Technologies’ EDS-728 and EDS-828 series of Ethernet switches are engineered to meet the demanding requirements of industrial networking applications. Their fusion of robust design, advanced features, and security capabilities makes them an excellent choice for organizations in need of reliable and efficient networking solutions.
Top Page Image Contents