•vCtrl is too high, use manual control to decrease it
•RGB color skew may also need manual adjustment
•Test the Cat5 cable with a proper cable tester, to ensure cable integrity and signal throughput
Blurry video or color skew
•Caused by skew between color channels, can be manually adjusted
•One value should remain zero, the other 2 can be adjusted up and down so all 3 color channels align up
•Only needs to be changed by a small amount for fine adjustment
•Test the Cat5 cable with a proper cable tester, to ensure cable integrity and signal throughput
No keyboard or mouse, USB errors, no audio, no serial link, no test pattern
•Cable may be broken or unreliable, no communication between units
•Test the Cat5 cable with a proper cable tester, to ensure cable integrity and signal throughput
•Unplug then plug in the power on Receiver and Transmitter units to restart them
Can’t get into serial menu
•Make sure serial port on PC is functioning and set up properly
•Make sure the right type of serial cable is used:
unit (StarTech.com ID: MXT100), and
(StarTech.com ID: SCNM9FF)
•If you are using the serial data link, use the same baud rate as the serial device or other PC uses
•It may take several tries to enter the code since it depends on timing
•Unplug then plug in the power on Receiver and Transmitter units to restart them
Instruction Manual
9