StarTech.com startech manual Introduction, Packaging Contents, System Requirements

Introduction

This high quality Removable ATA/ IDE Hard Drive Drawer/Mobile Rack delivers a convenient ATA/ IDE hot-swap solution, allowing you to quickly swap ATA/ IDE hard drives in and out of a computer without having to open the computer case.

Simply install the (included) drive bay into a 5.25in drive bay on the host computer, then mount a 3.5in IDE HDD into the (removable) caddy. Connecting the IDE hard drive to the computer is as easy as inserting the caddy into the drive bay, which can be locked to prevent unauthorized removal of the installed IDE drive.

A suitable solution for large volume drives, the HDD drawer supports IDE modes up to ATA-133, allowing you to swap in large amounts of data in a matter of seconds. With support for IDE HDD speeds up to 133 MBps, the mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance and versatility for enhanced storage applications.

The drive caddy features a rear panel ball bearing fan that helps keep the enclosed drive cool, in turn helping to optimize operation while preserving drive lifespan. To prevent damage to the hard drive(s) while being transferred in and out of the computer, the drive caddy features shock absorbers and rubber cushioning that help limit vibration/shock to the drive. This mobile rack is also compatible with DRW113- series ATA/ IDE hard drive caddies.

Packaging Contents

•1 x Hard Drive Caddy

•1 x Drive Bay

•2 x Keys

•1 x Screw Kit

•1 x Instruction Manual

System Requirements

•Computer with an available 5.25 inch Drive Bay

•1 x 40-pin IDE data cable

•Computer Power supply with available LP4 Molex power connector

Instruction Manual

1