Introduction Features, Installation | StarTech.com ATXPOW350DF

Introduction

Thank you for purchasing a StarTech.com high-performance dual-fan 350-Watt ATX power supply. With a super heavy-duty transformer and dual cooling fans, this power supply offers the best in reliability and performance. The two ball-bearing “smart” fans adjust their speed to provide optimal cooling for any operating environment.

Features

•Dual ball-bearing temperature-controlled smart fans

•Super heavy-duty transformer for longer life

•Additional drive power connectors

•Ideal for Pentium III, Pentium 4, Celeron, Duron and AMD Athlon

•Premium EMI/RFI filter improves power stability

•Backed by StarTech.com’s three-year warranty

WARNING! Computer parts can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. Also make sure that your computer is turned off and unplugged before attempting to open your computer case.

Contents

This package should contain:

•1 x ATXPOW350DF power supply

•1 x power cord

Installation

NOTE: Check the power supply voltage before installation. It should be the same as your local power voltage (115V for North America and 230V for most of the European countries). Change the voltage setting if necessary.

1.Make sure that your computer is turned off and unplugged. Remove the power cord from your old power supply.

2.Remove the cover of your system (see your computer's user manual for details, if necessary).

3.Disconnect all the power connectors from the mother board and the peripheral devices such as hard drives, floppy disks, etc. Make sure there are no devices connected to the existing power supply.

4.Remove the existing power supply from your computer case and replace it with the new StarTech.com power supply.

5.Connect the power connectors to your motherboard and peripheral devices.

6.Close your computer case.

7.Connect the power cord to the StarTech.com power supply.

ATXPOW350DF Connectors