Installation

Instruction Manual

WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your card. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. Also be careful to handle the card by its edges and not the gold connectors.

Please note: The following instructions assume that the SATA drives that will be connected to PEXSATA24E have been physically installed within the computer chassis. If this is not the case, and you require instruction on how to install the hard drive in the computer chassis, please consult the documentation that accompanied your purchase of the hard drive/computer.

Windows VistaTM Fresh Installation

Follow the instructions in this section if you are performing a new installation of Windows VistaTM, and you wish to boot from a drive attached to PEXSATA24E:

1.Shut down all power connected to the computer, as well as all devices connected to the computer peripherally (i.e. Printers, Monitors, Scanners etc.). As an added step to ensure safe installation, unplug the power supply from the computer.

2.Remove the computer cover, allowing access to the motherboard and available slots. For more detailed instruction on how to perform this step, please refer to the documentation that was included with your computer at the time of purchase.

3.Locate an empty PCI Express slot, removing the metal bracket covering the accompanying empty port/socket on the rear panel of the computer chassis.

4.Position the card above the open PCI Express slot, ensuring that the card is properly aligned with the slot. Insert the card firmly into the slot, distributing force evenly across the length of the board. Once inserted, secure the card into the adjoining socket (previously covered by metal bracket, on the rear panel of the computer chassis), using the correct size screw (if necessary, please consult documentation that accompanied purchase of computer).

5.Attach PEXSATA24E to the Serial ATA drive, using a SATA (data) cable.

6.Repeat steps 4 and 5 for each remaining hard drive that will be connected (internally) to PEXSATA24E.

7.Replace the computer cover and re-connect all power to the computer.

8.Start the computer as you normally would to perform an operating system installation, ensuring that the Windows VistaTM installation CD/DVD is present in the drive, and the BIOS has been suitably adjusted to boot from the CD/DVD Drive.9. When the Windows Install screen appears, fill in the necessary information and click

Next. Follow the operating system instructions until a page appears asking “Where

PEXSATA24E specifications

StarTech.com PEXSATA24E is a versatile and high-performance SATA expansion card designed to enhance storage capabilities for desktop computers. This PCI Express SATA card provides four internal SATA ports, allowing users to connect multiple SATA drives, enhancing system performance and storage flexibility.

One of the main features of the PEXSATA24E is its support for SATA III, which offers data transfer speeds of up to 6 Gbps. This ensures that the card can fully utilize the capabilities of modern SATA SSDs and HDDs, optimizing data transfer rates for applications that demand high speed and efficiency, such as video editing or large file transfers.

The expansion card is designed for easy installation, featuring a low-profile bracket option, making it compatible with a wide range of system configurations. This flexibility is particularly beneficial for users looking to upgrade their existing systems without needing to replace the entire unit. The card also features a PCIe 2.0 interface, ensuring compatibility with a variety of motherboards and a smooth integration process.

In terms of technology, the PEXSATA24E incorporates advanced data integrity features such as NCQ (Native Command Queuing) and AHCI (Advanced Host Controller Interface). NCQ allows multiple read and write commands to be executed simultaneously, improving overall efficiency and system responsiveness. AHCI contributes to better data management and supports features like hot swapping, enabling users to change drives without shutting down the computer.

Power management is another key aspect of the PEXSATA24E, as it helps maintain low power consumption while delivering optimal performance. Additionally, the card is compatible with various operating systems, including Windows, macOS, and Linux, providing broad usability for a diverse range of users.

With a robust design, the PEXSATA24E ensures reliability and stability for all connected devices. This makes it an ideal choice for those looking to build a customized storage solution, whether it’s for personal use, gaming, or professional tasks requiring additional storage capacity.

In conclusion, StarTech.com PEXSATA24E is an excellent solution for those seeking to expand their storage options with high-speed SATA connectivity, advanced technologies, and user-friendly features, making it a must-have for modern computing environments.