StarTech.com PCISOUND5CH2 manual Installation, Internal Headers, Internal Jumpers

Internal Headers

Note: The header pinout is Pin 1 to Pin 4 from left to right for all headers (6, 7, 8).

6. J1 - Analog CD/IN: Signals: L-G-G-R		7. J2 - Analog CD/IN: Signals: G-R-G-L
Pin #	Description	Pin #	Description
1	Left channel signal	1	Right channel ground
2	Left channel ground	2	Right channel signal
3	Right channel ground	3	Left channel ground
4	Right channel signal	4	Left channel signal

8.J3 - Auxiliary Input: Signals: L-G-G-R.

Pin # Description

1Left channel signal

2Left channel ground

3Right channel ground

4Right channel signal

Internal Jumpers

1-2 close - Center/Bass channel in normal mode

JP1 & JP2

2-3 close - Center/Bass channel in inverse mode

Installation

Note: It is recommended that you remove any previously installed sound cards and drivers prior to installing this card to avoid any conflicts. If previously installed drivers are not removed, this sound card may not function properly.

If your computer has on-board sound you will need to disable it on the motherboard. For more information please see your computer’s documentation or contact your computer’s manufacturer.

Instruction Manual

3