StarTech.com PEX2EC35 manual

Page 8

Instruction Manual

Connect the DVI like Expansion Cable (currently connected to the ExpressCard Bay) to the PCI Express Card.

Connect the remaining ends of the power cables (currently connected to the power port on the back of the ExpressCard Bay).

Connect the remaining end of the USB Type-B-to-10-pin-Header Adapter Cable to an available USB (Type A) port, by threading it through an open rear panel slot to an available (external) USB port.

5.Once the necessary connections have been made, close the computer case, and power on the computer. If you wish to install an Express-

Card at this time, please do so prior to booting up the computer.

5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PEX2EC35 FCC Compliance Statement Table of Contents Introduction FeaturesPackage Contents Installation Installing the PCI Express CardInstalling the 3.5 Bay Page Page Specifications ConnectorsTechnical Support Warranty Information
Top Page Image Contents