StarTech.com PEXSAT34RH manual Hardware Installation

Page 6

Installation

Hardware Installation

WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your PCI Express card. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. Also be careful to handle the PCI Express card by its edges and not the gold connectors.

1.Turn your computer off and any peripherals connected to the computer (i.e. Printers, external hard drives, etc.). Unplug the power cable from the rear of the power supply on the back of the computer and disconnect all peripheral devices.

2.Remove the cover from the computer case. See documentation for your computer system for details.

3.Locate an open PCI Express x2 slot and remove the metal cover plate on the rear of the computer case (Refer to documentation for your computer system for details).

NOTE: This card will work in PCI Express slots of additional lanes (i.e.x4, x8, or x16 slots).

4.Gently insert the card into the open PCI Express slot and fasten the bracket to the rear of the case.

NOTE: If installing the card into a small form factor/low profile system, replacing the pre-installed full profile bracket with the included low profile installation bracket may be necessary.

5.Connect SATA cables from the ports on the card to the SATA devices inside the computer.

6.Place the cover back onto the computer case.

7.Insert the power cable into the socket on the power supply and reconnect all other connectors removed in Step 1.

Instruction Manual

3

Image 6
Contents Port PCIe Sata III 6Gbps RAID Controller Card FCC Compliance Statement Table of Contents Packaging Contents IntroductionSystem Requirements Product Diagram Installation Hardware InstallationDriver Installation Windows XPWindows Vista/ 7 Management Utility Installation Optional Windows only Firefox From the menu bar, select Tools Options Verifying Installation Port MultiplierWindows RAID Configuration Card Bios MethodOperation Administration Console Method Your selection HyperDuo Configuration Card Bios MethodAdministration Console Method HyperDuo Management Windows only Page Specifications Compatible Operating SystemsTechnical Support Warranty Information Limitation of Liability

PEXSAT34RH specifications

StarTech.com PEXSAT34RH is an advanced PCIe SATA expansion card designed to enhance storage capabilities for servers, workstations, and high-performance computing systems. This product is a go-to solution for those looking to add multiple SATA drives to their existing setups, allowing users to maximize their data storage and improve overall system performance.

The PEXSAT34RH features a PCI Express 2.0 x4 interface, which ensures compatibility with a wide range of motherboards. It supports up to four SATA III (6 Gbps) drives, enabling users to connect additional hard disk drives or solid-state drives. With this expansion card, users can easily migrate data and improve redundancy through RAID configurations, including RAID 0, 1, 10, and JBOD support. This flexibility is essential for professionals who deal with large amounts of data and require reliable storage solutions.

One of the standout features of the PEXSAT34RH is its use of the ASMedia ASM1061 chipset, which enhances data transfer speeds and efficiency. This technology allows for better performance compared to older SATA controllers, making it ideal for high-demand applications such as video editing, gaming, and data analysis. The card also supports hot-swappable drives, meaning users can replace or add drives without having to power down their system, minimizing downtime.

In terms of design and installation, the PEXSAT34RH is user-friendly. It comes with a low-profile bracket, making it suitable for both standard and compact cases. The installation process is straightforward, with no additional drivers required for most modern operating systems, including Windows and Linux.

Additionally, the PEXSAT34RH includes support for TRIM and NCQ features. TRIM helps maintain SSD performance over time by enabling the operating system to inform the SSD which blocks of data are no longer in use. NCQ (Native Command Queuing) optimizes the processing of multiple commands, improving the performance of the drives during heavy workloads.

In conclusion, the StarTech.com PEXSAT34RH PCIe SATA expansion card is a robust solution for anyone looking to expand storage capabilities. With its support for multiple SATA drives, RAID configurations, and enhanced data transfer technologies, it provides the versatility needed for demanding applications, making it an excellent choice for both personal and professional use.