System Requirements
The following are required to install the console:
•1U Cabinet Console - assembled “LCD panel + keyboard + mouse pad” drawer
•Rear bracket & extension kit - This kit contains two pieces of rear brackets and two extensions. Make sure you have the correct kit to fit the depth of your cabinet.
Note: the following length is measured between front and rear poles, inside the rack cabinet not the outside depth of a rack
Front pole to rear |
|
|
|
|
|
|
pole distance | 1UCABCONS | 1UCABCONS17 | 1UCABCONS19 | |||
( Depth ) |
|
|
|
|
|
|
| cm | inch | cm | inch | cm | inch |
Minimum | 59 | 23.2 | 59 | 23.2 | 59 | 23.2 |
Maximum | 96 | 37.8 | 96 | 37.8 | 123 | 48.4 |
Front pole to rear |
|
|
|
|
pole distance | CABCONS30KIT | CABCONS42KIT | ||
( Depth ) |
|
|
|
|
| cm | inch | cm | inch |
Minimum | 57.5 | 22 5/8 | 77.5 | 30 1/2 |
Maximum | 70.5 | 27 3/4 | 90.5 | 35 5/8 |
Please see diagram on the following page 
Instruction Manual | 2 |