StarTech.com RACKCONS2001 manual Install three screws on each side of the rear of the console

Page 6

5.Gently extend the arms from the rails until they lock. Gently, but firmly insert the console into the left and right rails:

6.There are small release switches on either side of the console unit. Pull both switches at the same time, as the console is installed onto the rails.

Rail-Release switch

7. Install three screws on each side of the rear of the console:

Instruction Manual

Image 6

Contents 1U 20 High Resolution Rackmount LCD Console for 19in Rack FCC Compliance Statement Table of Contents Hardware Installation InstallationPackaging Contents IntroductionMounting the console Install three screws on each side of the rear of the console How to Use Connecting the ConsoleConfiguring Display Settings Turning on the ConsoleTesting the Console Panel Controls and OSD FunctionsContrast Auto tuneBrightness ColorIcon Description Image Pos PositionLanguage OSD PosExit Power IndicatorRecall Light Color StatusSpecifications RACKCONS2001 / RKCONS2001GBDimensions Technical Support Warranty Information Limitation of Liability