Philips HTS7520, HTS7500 Listen to radio, Reinstall all the radio stations, Change tuning grid

Listen to radio

1Press RADIO.

2Use the remote control to control the radio.

Button	Action
/	Selects a preset radio station.
/	Tunes the radio frequency up or
	down.
	Press and hold this button to
	erase the current radio station
	from the preset list.
	•	The preset number for
		other radio stations remain
		unchanged.

Reinstall all the radio stations

1Press RADIO.

2Press and hold PROGRAM for more than 5 seconds.

»All previously stored radio stations are replaced.

Note

•Check the radio antenna connection if no stereo signal is detected or less than 5 stations are detected during radio installation.

Search and store radio stations individually

1Press RADIO.

2Press / .

»It starts searching until a radio station is detected.

3Repeat step 2 until you tune to the radio station you wish to store.

•To netune the radio frequency, press / .

4Press PROGRAM.

»The preset station number blinks.

»If no action is carried out within 20 seconds after the above step, it exits the preset mode.

5Press / (or the Numeric buttons) to select a preset number to store.

6Press PROGRAM to con rm.

Change tuning grid

In some countries, the frequency step between adjacent channels in FM band is 50 kHz or 100 kHz.

Note

•This feature only applicable for certain region.

•Change tuning grid erases all preset radio stations.

1Press RADIO.

2Press .

3Press and hold (Play) until ‘GRID 9’ or ‘GRID 10’ is displayed.

»‘GRID 9’ for 50 kHz and ‘GRID 10’ for 100 kHz.

EN 31