Moxa Technologies IA260 specifications Hardware Specifications

	Embedded Computing Solutions
	Hardware Specifications
	Computer
	CPU: Cirrus EP9315 ARM9 CPU, 200 MHz
>	OS (pre-installed):Windows CE 6.0 or Linux
	DRAM: 128 MB onboard (optional 256 MB)
	Flash: 32 MB onboard (optional 64 MB)
	USB: USB hosts x 2, compliant with USB 2.0 (OHCI) type A
	connectors
	Storage
	Storage Expansion: CompactFlash slot
	Display
16	Graphics Controller: EP9315 internal graphics accelerator engine
	with TTL graphical signal support
	Display Memory: Dynamic video memory (shares system memory)
	Display Interface: CRT interface for VGA output, DB15 female
	connector
Embedded	Resolution: 1024 x 768, 8 bits
	Ethernet Interface
	LAN: 2 auto-sensing 10/100 Mbps ports (RJ45)
	Magnetic Isolation Protection: 1.5 KV built-in
Computers	Serial Interface
	Serial Standards: 4 RS-232/422/485 ports, software-selectable (DB9
	male)
	Console Port: RS-232 (TxD, RxD, GND), 4-pin header output
for	(115200, n, 8, 1)
	Serial Communication Parameters
Automation	Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data
	Data Bits: 5, 6, 7, 8
	Stop Bits: 1, 1.5, 2
	Parity: None, Even, Odd, Space, Mark
	direction control) for RS-485
IA260	Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates;
	see user’s manual for details)
Series	Serial Signals
	RS-232:TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
	RS-422:TxD+, TxD-, RxD+, RxD-, GND
	RS-485-4w:TxD+, TxD-, RxD+, RxD-, GND
	RS-485-2w:Data+, Data-, GND
	Digital Input
	Input Channels: 8, source type
	Input Voltage: 0 to 30 VDC at 5 KHz

Digital Input Levels for Dry Contacts:

•Logic level 0: Close to GND

•Logic level 1: Open

Digital Input Levels for Wet Contacts:

LEDs

System: Power, Ready, Storage

LAN: 10M/Link x 2, 100M/Link x 2 (on connector)

Serial: TxD x 4, RxD x 4

Switches and Buttons

Reset Button: Supports “Reset to Factory Default”

Physical Characteristics

Housing: Aluminum, industrial vertical form factor

Weight: 1 kg

Dimensions: 52 x 112.6 x 162 mm (2.05 x 4.43 x 6.38 in)

Mounting: DIN-Rail, wall

Environmental Limits

Operating Temperature:

Standard Models: -10 to 60°C (14 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Operating Humidity: 5 to 95% RH

Storage Temperature:

Standard Models: -20 to 80°C (-4 to 176°F)

Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Power Requirements

Input Voltage: 12 to 48 VDC (3-pin terminal block)

Power Consumption:

With no load on USB ports: 5.8 W

•240 mA @ 24 VDC

•480 mA @ 12 VDC

With full load on USB ports: 11 W

•450 mA @ 24 VDC

•900 mA @ 12 VDC

Regulatory Approvals

EMC: CE (EN55022 Class A, EN61000-3-2 Class A, EN61000-3-3, EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A), CCC (GB9254, GB 17625.1)

Safety: UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), LVD (EN60950-1), CCC (GB4943)

Reliability

Automatic Reboot Trigger: Built-in WDT (watchdog timer)

Warranty

Warranty Period: 5 years

Details: See www.moxa.com/warranty

Note: The Hardware Specifications apply to the embedded computer unit itself, but not to accessories. In particular, the wide temperature specification does not apply to accessories such as the power adaptor and cables.

H/W Block Diagram Ethernet x 2

•Logic level 0: +3 V max.

•Logic level 1: +10 V to +30 V (COM to DI)

Connector Type: 10-pin screw terminal block (8 points, COM, GND)

Isolation: 3 KV optical isolation

Digital Output

Output Channels: 8, sink type

Output Current: Max. 200 mA per channel

On-state Voltage: 24 VDC nominal, open collector to 30 V

Connector Type: 9-pin screw terminal block

Isolation: 3 KV optical isolation

USB 2.0	VGA	LAN	LAN
Host x 2

PHY PHY

LAN

Controller

Power	MAC
Circuit

RTC	Cirrus Logic EP9315
	32-bit ARM9 200 MHz

Watchdog UART

MOXA MOXA MOXA MOXA

UART UART UART UART

ASIC ASIC ASIC ASIC

128MB

RAM

32MB

Flash

CF

Function

DIx8	DOx8	Serial	Serial	Serial	Serial	Console
		Port 1	Port 2	Port 3	Port 4	Port

RS-232/422/485 x 4 RS-232

16-4 w w w. m o x a . c o m i n f o @ m o x a . c o m