Q-Logic 9080 quick start

Page 4

Step 4. Verify that the equipment shipped matches the packing list.

Tools and Equipment Required

❑An ESD wrist strap

❑A #2 Phillips screwdriver

❑Pen (felt-tip) to mark the mounting holes on the rack

2

Image 4

Contents Quick Start Guide Support.qlogic.com Pre-Installation Checklist SilverStorm Quick Start GuidePage Installation Tasks LeafChanging the IP Address and Default Gateway To change the switch default gateway IP address enter System prompts for a password. At the prompt enterTo to exit the CLI enter Set OOB LAN IP WindowInstalling Documentation from a CD Place the Documentation CD in the CD-ROM drivePage Declaration of Conformity Standards appliedPage Page D000010-003 Rev. a