Q-Logic 4100 Installation, Environmental, Specifications, Condition Environment, Temperature

QuickSpecs

HP StorageWorks EVA iSCSI Connectivity Option

Technical Specifications

	Multi-Path support	HP OpenVMS	Native
		Windows	Microsoft MPIO
		Linux	Device Mapper
		Sun	MPxIO
		VMware	Native software MPxIO
	Max. Pending Commands	Default value of 64.
	Host Interface	Uses standard TCP/IP connection, RJ45 connector
	Distance	GbE Copper, CAT-5e or CAT-6, twisted pair
	Host Platform Support	Any 32-bit or 64-bit servers running the supported OS
	Performance	half duplex	>30,000 > 200 MB / Sec
		full duplex	> 360 MB / Sec
	Maximum Host	Architectural Limits
	Connection Design Limits	256 connections per iSCSI port
	for iSCSI*	mpx100b is limited to 16 iSCSI initiator ports in base unit. License upgrades
		are available in two steps, a 32 initiator license followed by an unlimited
		license up to the HP supported maximum.2 FC target ports, with maximum
		initiators
		* Please see the product user guide available on the Storage Networking
		product page and the SAN Design Guide for latest tested and supported
		configurations located at: http://www.hp.com/go/sandesignguide.
Installation	User installable, but recommended field service install
Environmental	Optional side-by-side 1U rack mount kit
Specifications	Non-cable-side to cable-side airflow; power from cable-side; 1U, 19-in. EIA rack-compliant
	Cooling: Two fans with back-to-front airflow
		Condition
	Environment	Operating1	Non Operation2
	Temperature	5° to 40° C	-25°C to 70° C
		(41° to 104° F)	(-40° to 158° F)
	Humidity3	5 to 90%, non-condensing	5 to 93%, non-condensing
	Altitude	3 km	15 km
	Shock	IEC 68-2, 4g, 11ms, 20 repetitions	IEC 68-3, 30g, 292 ips, 3 repetitions,
			3 axis
	Vibration4	IEC 68-2, 5-500Hz, random, 0.21G	IEC 68-2, 5-500Hz, random, 2.09G
		rms, 10 minutes	rms, 10 minutes
	Power AC input Nominal	Power AC input Nominal: 0.5A@100-125 VAC 0.25A@200-240 VAC
	Frequency Range	47 to 63 Hz
	Nominal Frequency	50 Hz to 60 Hz
	Range
	Power Dissipation	48W maximum (optics included)

1Environmental specification for operating condition should be satisfied before the iSCSI Connectivity Option subsystem is powered on. Maximum temperature of 40°C should be strictly satisfied at air inlet portion.

2Non-operating condition includes both packing and unpacking conditions unless otherwise specified.

3No condensation in and around the iSCSI Connectivity Option should be observed under any conditions.

4The above specifications of vibration are applied to all three axes.

On shipping/storage condition, the product should be packed with factory packing.

DA - 12413 Worldwide — Version 10 — June 19, 2009 Page 10