Q-Logic QLE8042 quick start CNA LEDs, Warranty, Laser Safety

Step 4. Install the SANsurfer FC HBA Manager (FCoE Support Included)

To install the SANsurfer FC HBA Manager from the CD:

1.Select your applicable operating system.

2.Click I Accept on the License Agreement.

3.Select your specific operating system.

4.Select the SANsurfer FC HBA Manager install file.

5.Follow the on-screen directions to complete the installation.

Congratulations! You have successfully installed your QLogic CNA!

❑To obtain the most current drivers, management tools, user instructions, and documentation, please visit the QLogic website at http://driverdownloads.qlogic.com and download the latest versions.

❑The following section contains additional information about the QLogic CNA, including the LED scheme, warranty, and laser safety information.

CNA LEDs

QLE8042 CNA LED Scheme

Green LED (Link)	Green LED	Activity
	(Activity, TX/RX)
Off	Off	Power on (no link)
On	Off	Link established, no activity
On	Flashing	Link established, TX/RX activity

Warranty

Please check the QLogic Web site at http://www.qlogic.com/Support/warranty.aspx for warranty details.

Laser Safety

FDA Notice

This product complies with DHHS Rules 21CFR Chapter I,Subchapter J. This product has been designed and manufactured according to IEC60825-1 on the safety label of laser product.

Class 1 Laser Product	Caution—Class 1 laser radiation when open
Appareil laser de classe 1	Do not view directly with optical instruments
Produkt der Laser Klasse 1
Luokan 1 Laserlaite	Attention—Radiation laser de classe 1
	Ne pas regarder directement avec des instruments optiques
	Vorsicht—Laserstrahlung der Klasse 1 bei geöffneter Abdeckung
	Direktes Ansehen mit optischen Instrumenten vermeiden
	Varoitus—Luokan 1 lasersäteilyä, kun laite on auki
	Älä katso suoraan laitteeseen käyttämällä optisia instrumenttej

CLASS I LASER

5