English
DVD Setup Menu Options (continued)
Audio Setup Page (underlined options are the factory default settings)
HDMI Audio | This setting is only required if you are using the DVD system’s | ||
| HDMI OUT socket to connect your TV or other display device | ||
| (see ‘Option 5: Connecting to a | ||
| Note: It may take a while for the DVD system and the input device to | ||
| communicate and initialise. | ||
| { Off } | – | Select this if the playback audio format is not |
|
|
| supported by HDMI connection (e.g. |
|
|
| projector, SACD). It will turn off the HDMI |
|
|
| audio output. |
| { PCM } | – | Select this to downmix the audio signals to |
|
|
| |
| { All } | – | Select this to enjoy the |
|
|
| output through the HDMI connection. |
| Note: It is not possible to listen to SACDs or | ||
| Audio CPPM (Content Protection for Playable Media) sources using the | ||
| HDMI connection. |
|
|
|
| ||
Night Mode | This mode optimises playback of sound at low volume. High | ||
| volume outputs will be softened and low volume outputs will be | ||
| enhanced to an audible level. This feature is only applicable for | ||
| DVD video discs with Dolby Digital mode. | ||
| { On } | – | Turns on night mode. |
| { Off } | – | Turns off night mode feature. Selects this to |
|
|
| enjoy the surround sound with its full |
|
|
| dynamic range. |
| This feature allows you to adjust the audio delay times if the | ||
Lip Sync | |||
| video playback is slower than the audio output streams, hence | ||
| resulting in |
|
Access the lip sync setup menu. Use W X keys to set the delay times (0 ~ 200 ms) for the audio output.
38