Quick Start Guide
Installation Instructions
Congratulations on your purchase of the SANbox® 5800V Series Stackable Fibre Channel Switch. This guide describes the steps to install and activate your new switch using a Windows® workstation. For advanced options and instructions (including Solaris®, Linux®, and Mac OS X® installations), refer to the SANbox 5800V Series Stackable Fibre Channel Switch Installation Guide, which is available at www.qlogic.com.
NOTE: Do not apply power to the switch until instructed in Step 5.
Step 1. Verify the Package Contents
The SANbox 5800V Series Fibre Channel Switch is shipped with the following items:
1SANbox 5800V Series Stackable Fibre Channel Switch
1AC Power cord (5800V)
2AC Power cords (5802V)
4 Rubber feet
1 Enterprise Fabric Suite 2007 CD (free
Depending on which SANbox 5800V switch you ordered, it may also include Small
NOTE: If you ordered SFPs and XPAK switch stacking cables separately, they will arrive in a different package. XPAK switch stacking cables connect SANbox 5800V Series switches together through the XPAK ports.
Step 2. Mount the Switch
❑For a surface mount, attach the rubber feet to the locations on the bottom of the switch. For a rack mount, install the SANbox 3000/5000 series rail kit and the switch in a standard 19" rack as described in the SANbox 3000/5000 Series Fibre Channel Switch Rack Mounting Guide.
3