TOA Electronics CPEI 25150 manual Forwarding Tab, Port Forwarding Basic Tab Fields

Basic Tab

Port Forwarding Basic Tab Fields

	Field or Button	Description
	Enable UPnP IGD	Enables Universal Plug and Play (UPnP)
		Internet Gateway Device (IGD) profile to
		allow certain Windows applications to setup
		the port forwarding rule dynamically when
		NAT is enabled on this device.
	DMZ IP Address	Enter the DMZ IP Address.
Be sure to click Apply once you have made changes.

Forwarding Tab

Click ADD to create additional Port Forwarding rules.

	Forwarding Tab Fields
Field or Button		Description
Select		Select a box when you want to delete the
		specific row.
Protocol		Select TCP (Transmission Control Protocol)
		or UDP (User Datagram Protocol).
WAN Port Start		Enter the beginning port range for external
		network access.
WAN Port End		Enter the ending port range for external
		network access.
LAN IP Address		Enter the IP address to host the service in
		the dotted-decimal format.
LAN Port Start		Enter the beginning port range for internal
		network access.
LAN Port End		Enter the ending port range for internal
		network access.
Enabled		Check to enable specific port forwarding.

Be sure to click Apply once you have made changes.

Section 4: Advanced Configuration 16